The DSP-55 is a compact vehicle detector that will operate on any voltage from 8 to 35 volts DC. The low voltage range is ideal for solar applications, with Free Exit Probe kit wtih 75' Lead Wire The DSP-55 can be connected to a standard inductive loop or one of Diablo Controls Free Exit Probes. The Diablo Controls Free Exit Probe is a small “pipe shaped” device approximately 4-1/2” by 1” and is designed to be buried in the ground to detect vehicles. Contact Diablo Controls for more information on the Free Exit Probe. The DSP-55 can be used as either a safety loop or free exit probe detector. It should not be used as a safety loop if used with a Free Exit Probe. It also has the flexibility to be either “fail-safe” or “fail-secure”. The DSP-55 has 10 selectable sensitivity settings and uses a 10-position DIP switch to configure the detector. This includes delay or extension timing functions and pulse on entry or pulse on exit features. This makes the DSP-55 very flexible and versatile for those installations that need a little more than a standard detector. The Diablo DSP-50 vehicle detector has been specifically designed to handle all parking, drive-through and access control applications. This device will work when connected to an embedded street loop or, (with a switch setting) the device will operate with a Mini-Loop available from Diablo Controls. The Diablo Controls Mini-Loop is a small pipe shape device-approximately 5 by 3/4 and is designed to be buried in the ground to detect vehicles.