Double-sided polyethylene foam glazing tape, 3/4 in x 1/16 in x 164 ft (50 m), white on a 3-inch core; single roll intended for insulated glass interior seals and general non-structural mounting Closed-cell cross-linked polyethylene foam carrier coated both sides with solvent-based acrylic adhesive; formulated for rapid initial tack and high peel adhesion to glass, wood and aluminum Aama-certified for window glazing; designed to form the interior seal between insulated glass and sash or box to help limit wind and water infiltration when correctly installed Technical details: blue polyolefin release liner 4 mil for controlled removal, service temperature -22°F to 212°F, peel adhesion 73 oz/in (1/16") and 46 oz/in (1/8"), densities listed Installation features include easy-peel continuous liner, cut-to-length convenience and pressure application for full contact; cleaner and more consistent than glazing putty for weatherproof sealing This double-sided polyethylene foam glazing tape is engineered for reliable interior sealing of insulated glass units and for general mounting tasks requiring a durable, consistent compression seal. The product features a closed-cell cross-linked polyethylene foam carrier coated on both faces with a solvent-based acrylic adhesive system formulated for rapid initial tack and high peel adhesion to common substrates such as glass, wood and aluminum. The tape is Aama-certified for window glazing applications and is intended to form the interior seal between insulated glass panels and window sash or box to help limit wind and water infiltration when installed according to standard glazing practices. Key physical and performance attributes include a white foam color, 3/4 inch width, 1/16 inch thickness, and 164 ft (50 m) continuous length supplied on a 3-inch core for compatibility with manual or automated dispensers. The release liner is a blue polyolefin film, 4 mil thick, designed for controlled continuous removal during installation. Service temperature range is -22°F to 212°F. Measured peel adhesion is 73 ounces per inch for the 1/16-inch thickness and 46 ounces per inch for the 1/8-inch thickness; foam densities of 4 and 2 pounds per cubic foot correspond to the respective thicknesses. These technical parameters support consistent compression sealing and outdoor weather resistance. Typical uses include forming the interior weatherproof seal in IG unit installations, creating dust and moisture barriers, and non-structural mounting of emblems, nameplates, mirrors and plastic trim pieces. Compared with glazing putty, the tape provides a cleaner, faster application and more uniform compression performance. For correct installation, prepare substrate surfaces by cleaning and drying, cut tape to the required length, remove the release liner and apply with firm pressure to ensure full contact and adhesive engagement. Follow local glazing codes and manufacturer guidelines when integrating this tape into window assemblies.