Double Sided Mounting Tape: This wall tape made of PE elastic foam, thickness is 0.004inch(1.1MM),1 inch (25MM) wide,10 FT(3 meters) long,waterproof, heat resistant, heavy duty, mount everything indoor and outdoor. High initial adhesion Waterproof and Heat resistant double sided tape-- Work temperature is between -40 to 158 °F (-40 to 70 °C). Can be immersed in water. Perfect for kitchen or bathroom, indoor and outdoor, heavy rain Easy to use-- Easy to pull out of the double sided adhesive tape roll, use scissors to cut and install. Peel the white liner from the corner with nails. Use this 2 sided tape to stick one picture on wall within one minutes. Indoor and outdoor use Double Sided Foam Tape: This two sided tape is multifunctional. Such as: mounting tape for general mount/stick, waterproof double sided foam tape can be used in washroom. Picture hanging strips for photo frame and poster hanging. This Strong adhesion tape can be used for poster bonding, logo bonding, carpet fix,car decoration Application Techniques: This double sided tape for walls has very high initial adhesion and after applying it 24 hours the adhesion is the best. Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C).The working temperature is -40 to 200 °F. The contacted surfaced should be dry and clean Features: --Good UV Resistance. --Good Water Resistance. --Good Chemical Resistance. --Good Humidity Resistance. --Good Temperature Cycling Resistance. Specifications: --Quantity: 1 inch * 10FT,(25 mm x 3 meters) --Material: PE foam+arylic tape --Thickness: 0.04inch (1.1mm) --Colour: White How to use: 1.Clean the surface to which you want to stick. 2.Get the tape from white big release paper and paste it. 3.Peel off the other release paper. 4.Put the other surface to the tape and press few seconds. TIPS: 1. Ensure that the contacted surface of the sticky tape is kept clean and dry. Press down hard and hold for 5 seconds after sticking. 2. If you need to remove the tape after it has been pasted to an object, make sure this is done slowly and carefully to prevent damage to the surface of the object. Especially for the paint wall, it is better to cut a small foam tape to test if the foam tape will damage the paint wall when you peel of the foam tape 3. To avoid damage, do not use the tape to hang very heavy objects or valuables 4. Keep this product out of the reach of children 5. Two bonding surface should be dry and clean 6.Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended because the adhesive becomes too firm to adhere readily. If the temperatures is below 50°F (10°C), we can bond two object in the place which the temperatures is between 70°F to 100°F (21°C to 38°C), after tape application, the bonding is steady in low temperature. If have to apply this tape in low temperature, it is better to use some heating equipment such as hair dryer to help when bonding. However, once properly applied, low temperature holding is generally satisfactory