⚡【Good Performance】This dual power transfer switch supports two-way power switching, which is divided into the common power supply and standby power supply, in case of common power failure or voltage anomalies, it automatically shifts the load from the common source to the standby source, the common power supply is restored after the incoming call, ensuring uninterrupted power supply. ⚡【Safety Protection 】The switch supports short-circuit and overload protection functions, which can effectively protect the safety of the use process, so that you can rest assured when using. The internal circuit breaker is also designed with an arc-extinguishing cover, which can isolate the arc from damage to the switch. ⚡【Helpful Assistant】This dual power generator changeover switch is highly responsive and can quickly and automatically switch power within seconds(≤2s), minimizing downtime and protecting sensitive electronic equipment from being affected. In some cases, you can also set it to manually switch power. ⚡【Easy to Operate】Two operation modes (automatic & manual), clear prompt lights, and a detailed instruction manual ensure that you can use it easily. With a reasonable structure and small size, it can be quickly installed horizontally or vertically, which increases the flexibility of using scenarios and fully meets your needs. ⚡【Wide Application】This dual power generator changeover switch can be used for single-phase AC110V power circuits as well as bi-directional power sources such as commercial generators, solar power, and batteries. If it is a DC or low voltage power supply, the inverter needs to be connected to a dual power source after reversing to AC 110V, such as a meter, street light, inverter, UPS, etc.

Details

Mounting Holes: 4 mounting holes on the back panel make it easy for you to fasten it to the wall quickly.

Rounded Corners: The burr-free rounded design can better care for your skin and add to the overall beauty of the product.

Terminal Block: Equipped with copper terminals, it has better conductivity.

Application

It can be used for single-phase AC110V power circuits as well as bi-directional power sources such as commercial generators, solar power, and batteries. If it is a DC or low voltage power supply, the inverter needs to be connected to a dual power source after reversing to AC 110V, such as a meter, street light, inverter, UPS, etc.

Specification

Assembly Required: No

Style: Modern

Shape: Rectangular

Color: Blue, Gray

Material: Plastic, Pure Copper, Copper

Rated Current: 63A

Bore: M6 (6mm/0.24in)

ATS Level: CB Level

Used Level: AC-33iB

Conversion Mode: Automatic Transfer and Self-Recovery

Display Function: Indicator Light Display

Installation Type: Wall Mount (Horizontal or Vertical)

Operating Voltage: AC110V

Rated Voltage: AC240V

Line Current: 6A-63A

Working Frequency: 50HZ/60HZ

Insulation Voltage: AC690V

Conversion Time: About 2S

Contact Type: Edged Output Contacts

Circuit Type: Bidirectional

Actuator Type: Ring Cross

Number of Poles: 4

Mounting Hole Distance: 20.6cm/8.11 in

Base Width: 12.5cm/ 4.92 in

Product Size: 22.4*13.5*10cm/8.82*5.31*3.94in

Package Size: 23*14.5*13cm/9.06*5.71*5.12in

Gross Weight: 1.85kg/4.08lbs

Net Weight: 1.76kg/3.88lbs

Package Included

1* Dual Power Automatic Transfer Switch

1* English Manual

Notes

1.Please check the style and size before purchasing.

2.Please read the instruction manual completely before installation and use, and pay particular attention to the safety instructions included.

3.Please note that the power supply is cut off when the voltage is switched in both directions.

4.Please note that the switch cannot turn the generator on or off.

5.When both normal and standby power are supplied at the same time, the switch will give priority to the normal power.

6.Please turn the handle in the direction of the arrow. Please do not use the handle in automatic control.

7.Please do not install the switch with leakage protection on the upper end to avoid tripping. If necessary, install it on the lower end.

8.This product cannot be mounted on a rail. General household distribution boxes are too small for concealed distribution boxes.

9.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement and make sure you do not mind before ordering.