Fan and light 2 in 1 : One E26 Socket can support two uses for fan and light. The Ceilling Fan and the LED bulb 2 in 1 , so it is easy for you to replace the ceilling light by this fan light Easy to install: The Socket Fan light is easily for installing as a regular lightbulb, no need you install one new socket for the fan alone. If you had installed one E26 base socket for your lightbulb before,just use the installed socket is ok. We also offer you one new E26 socket for the fan light if you had no installed socket before. 1500Lum and Three color kelvins:The light is supper bright when highest brights for any dark room.10%-100% brightness smooth adjustable by remote control. The color temperature selectable 3000K(eyes protect),4500K(natural color) and 6500K(cool white). 5 level speed wind force and super no noise:20 inch Fan diameter,100RPM-500RPM fan speed selectable by remote control.the highest speed is about 20W.It is good enough for bedroom, kitchen, dining room, foyer, storage room etc.Magnetic levitation motor for the fan, so it is completely noise free. Remote control with timer:The fan light controlled by remote control.the remote control distance about 33-49ft(10-15m).There Main Power on/off button for the fan and light. Independent Power on/off button for fan. Independent button for Power on/off and color temperature selection and brightness adjustable for light.5 buttons for 1-5 speed of the fan.Also there 1 hour,2 hours 4 hours and 8 hours timer buttons. It makes you use the fan light Flexible. One E26 Socket and One Extension Tube Included:Convenient for users without E26 sockets had been installed before.Or the users who want to install the fan light in areas where other ceiling equipment affects the operation of fan lights. The product dimensions are 20 x 20 x 6.3" from blade tip to blade tip with 5 blades installed.
5 pieces blades makes the wind speed is uniform and soft.
The lampshade is made of matte acrylic material, the lighting is soft.
Short press the light control button on the remote control: the light switches between warm white, normal white, cold white, and OFF state
When the light is turned on, long press the light control button on the remote control. The brightness of the lamp can smoothly vary between 10% and 100% brightness. The brightness of the lamp can smoothly change from the lowest brightness to the lowest brightness, or from the lowest brightness to the highest brightness.
If you need to install an E26 base, please note that : the middle pole of the base should be connected to the L-wire of the power supply, and the pole connected to the thread should be connected to the N-wire of the power supply
The fan blades can be directly inserted into the slot of the fan light body without the need for screws for installation. When dismantling, simply pull out the blades with force, without worrying about the blades being damaged.
When the fan lights switch between different working modes, there is a beep prompt.