[Professional-grade Hinge Drilling Machine]:This product can complete the processing of hinge hinge holes and screw holes on both sides at one time to improve production efficiency.Suitable for wooden door,closet and cabinet installation,an efficient tool for decoration workers and DIY enthusiasts [Precise & Efficient Drilling]:The machine is equipped with high-precision positioning guide plate,which is able to adjust the drilling position accurately and supports flexible adjustment in both vertical and horizontal directions.The distance between the drill head and the table surface can be controlled by turning the top bolt(0-2.76 inch adjustable)to avoid drilling too deep and damaging the material [Easier & Safer to Use]:Adopting foot switch to control the operation,freeing your hands,simple and easy to use,no need for complex training to get started.The control panel is equipped with emergency stop knob and tool calibration knob to ensure the safety and reliability of the operation process and the accuracy of the drill bit position [All-In-One Accessory Kit]:Standard 48-6 drill kit(including φ35 mm x1,φ3 mm x2),the drill material is made of high carbon steel material with high hardness and long service life;the drill bits can be changed at any time.Note:This product does not include a 48-6 drill kit,please purchase separately if needed [Parameter]:Voltage:110 V;Power:1500 W;Punching Depth:0-1.97"(0-50 mm);Speed:2800 r/min;Drill:φ35 mm(x1) + φ3 mm(x2);Combined Drill Model:48-6;Scale:39.4"(100 cm);Air Pressure:0.6-0.8 MPA;Net Weight:140.8 Lbs(64 kg);Gross Weight:233.2 Lbs(106 kg);Package Size:31.89" x 28.54" x 65.75"(81 x 72.5 x 167 cm)

Precautions For Use：

1.Before operation,check whether the power cable is properly connected,whether the protective device and the pressing device are complete,and whether the components are normal.

2.The operating position should be bright and without shadow.

3.The drill should be centered, balanced and sharp.

4.This machine is mainly used for wood punching processing(thin aluminum can also be),and the selection of materials can not have nails,screws and other tools damaged or blunt foreign bodies.

5.Hands should not touch the rotating parts of the machine tool during operation, and the wood chips should not be removed during operation.The power supply must be cut off before adjusting or removing the wood chips,and can only be carried out after the machine tool stops working.

6.Stop the machine immediately if anything abnormal is found.

NOTE：Confirm drill hole size before purchase.