ERA Paints Red Engine Paint With Omni-Curing Catalyst Technology - 2K Aerosol Glossy Finish With High Temp Resistance And Extreme Durability Against
$62.99
by ERA Paints
Get the Rest or Grab the Best! Our premium 2k aerosol engine paint is made in the USA with American materials. Unbeatable quality and durability - easy to apply Tired of Hit And Miss Paint Jobs with the brush-on solutions? Our 2K aerosol paint steps it up a notch. No brush no fuss. No Primer needed: just clean; mask and spray for a sleek and lustrous engine. It doesn't get easier than this Prep is your first step - clean your engine thoroughly using a wire brush with warm dish soap and water. Next use ERA degreaser followed by masking. Finally apply the spray paint by activating the special catalyst that ensures a fast cure and extreme durability We've got the best durability in the business - our special 2K paint uses a catalyst hardener and was purposefully developed to create an incredibly hard chip-resistant surface Extreme temperatures; discoloration; chemicals like brake fluid/acetone/lacquer thinner etc. are no problem for our specially formulated 2k paint ERA Paints was founded in 2016 to bring the finest quality auto touch up paint products to the DIY auto market. And our aerosol 2K Engine Paint does not disappoint!
We offer high quality premium 2K aerosol spray paints which adhere so well that they can be sprayed right over rust!
One 2k High Temp Engine Spray paint can should be enough to apply 2-3 coats on your engine.
Our engine paint resists chipping flaking fading and has superior chemical protection against brake cleaner lacquer thinner acetone brake fluid etc.
Our spray paint is not typical rattle can paint: it is formulated as a 2K paint - which means a catalyst is introduced into the paint at application which creates a chemical reaction that causes the paint to quickly cure with a very hard surface.
How do I prep my engine for painting?
Failing to prep is prepping to fail so we at ERA always emphasize the significance of prep efforts. The engine needs a thorough cleaning with a wire brush and warm water and dish soap detergent. Then degreaser needs to be applied to remove any impurities and oil/grease.
The next step is to tape up your engine and area to prevent overspray
Once your prep is done it is time to paint
How do I use the 2k High temp spray paint?
Introduce the catalyst into the paint. Shake the can vigorously and spray 1 or 2 coats. Note that pot life (usable spray time) is about 8 hours
Once fully cured you will not believe how your engine pops with outstanding shine and durability
Proudly Made in USA with all American materials. Keeping jobs in America!
For safety reasons wear a NIOSH approved respirator breathing mask during painting to avoid inhaling any harmful chemicals.
Our prep kits include everything needed to paint your engine including quality 3M masking tape - just need to add warm water and detergent!
We offer high quality premium 2K aerosol spray paints which adhere so well that they can be sprayed right over rust!
One 2k High Temp Engine Spray paint can should be enough to apply 2-3 coats on your engine.
Our engine paint resists chipping flaking fading and has superior chemical protection against brake cleaner lacquer thinner acetone brake fluid etc.
Our spray paint is not typical rattle can paint: it is formulated as a 2K paint - which means a catalyst is introduced into the paint at application which creates a chemical reaction that causes the paint to quickly cure with a very hard surface.
How do I prep my engine for painting?
Failing to prep is prepping to fail so we at ERA always emphasize the significance of prep efforts. The engine needs a thorough cleaning with a wire brush and warm water and dish soap detergent. Then degreaser needs to be applied to remove any impurities and oil/grease.
The next step is to tape up your engine and area to prevent overspray
Once your prep is done it is time to paint
How do I use the 2k High temp spray paint?
Introduce the catalyst into the paint. Shake the can vigorously and spray 1 or 2 coats. Note that pot life (usable spray time) is about 8 hours
Once fully cured you will not believe how your engine pops with outstanding shine and durability
Proudly Made in USA with all American materials. Keeping jobs in America!
For safety reasons wear a NIOSH approved respirator breathing mask during painting to avoid inhaling any harmful chemicals.
Our prep kits include everything needed to paint your engine including quality 3M masking tape - just need to add warm water and detergent!