Model: 1204M-5305 36V / 48V, 325A, 0-5kΩ, Programmable. Note: This unit is pre-configured for 48V, 325A, 0-5K. To adapt it for other models, reprogramming via handheld programmer is required. EZROAD 1204M-5305 Controller provide fully programmable control of DC series motors performing on-vehicle traction or pump duties. Primarily designed for battery-powered vehicle applications using either electric or hydrostatic traction. These include industrial trucks, personnel carriers, mobile elevating work platforms, and golf and utility vehicles. This is an aftermarket part, not an original. It is compatible with your device and will function like the original. Model: 1204M-5305 Programmable DC Motor Controller
Specification:
Voltage: 36V / 48V
Current Limited: 2 Min 325A, 1 Hour 140A
Throttle Type: 0-5kΩ
EZROAD Programmable 1204M-5305 electronic motor speed controllers are designed to provide smooth, silent, cost-effective control of motor speed and torque on a wide variety of industrial electric vehicles.
This is an aftermarket part, not an original. It is compatible with your device and will function like the original.
After purchase, please contact our online support team for the installation guide PDF and additional product details.
Key features of the EZROAD 1204M-5305 controllers include:
Universal logic board supports multiple throttle types and high pedal disable (HPD) options.
1.Protection provided by rugged anodized aluminum extruded housing.
2.Simple mounting and wiring with push-on connectors for control signals.
3.Plated solid copper buses used for all power connections.
4.Thermal protection and compensation circuit provides constant current limit over operating range and during under/over temperature cutback; no sudden loss of power under any thermal conditions.
5.Throttle fault protection circuitry disables controller if throttle wires become open.
6.HPD feature prevents controller operation if key is turned on while throttle is applied.
7.Plug braking diode internal to controller.
8.Undervoltage cutback function protects against low battery voltage, including low voltage caused by external loads.
9.Easily programmable through the handheld programmer 1313-4331 or 1314 PC programming station.
Connections:
This is an upgraded controller featuring a J4 connector, designed for status LED indication or programming interfaces.
These controllers have five low-current connections: four 6.35 mm push-on terminals (J1, J2, J3, and J5), and one 4-pin connector (J4).
J1: Keyswitch.
J2: Wire 1 of 2-wire throttle; Pot High of 3-wire or ITS throttle.
J3: Wire 2 of 2-wire throttle; Pot Wiper of 3-wire throttle; Pot Low of ITS thottle; or electronic throttle input.
J4: 4-pin connector, an external Status LED or a programmer can be connected to J4. Note: When J4 is used for a Status LED, a jumper must be added between pins J4-1 and J4-4.
J5: Reverse signal output / main contactor coil driver.
Looking for parts compatible with Curtis controllers? Our inventory includes a comprehensive range of compatible parts. Simply enter your model or part number to find the exact match in our store. Our product specialists are available for support.
Specification:
Voltage: 36V / 48V
Current Limited: 2 Min 325A, 1 Hour 140A
Throttle Type: 0-5kΩ
EZROAD Programmable 1204M-5305 electronic motor speed controllers are designed to provide smooth, silent, cost-effective control of motor speed and torque on a wide variety of industrial electric vehicles.
This is an aftermarket part, not an original. It is compatible with your device and will function like the original.
After purchase, please contact our online support team for the installation guide PDF and additional product details.
Key features of the EZROAD 1204M-5305 controllers include:
Universal logic board supports multiple throttle types and high pedal disable (HPD) options.
1.Protection provided by rugged anodized aluminum extruded housing.
2.Simple mounting and wiring with push-on connectors for control signals.
3.Plated solid copper buses used for all power connections.
4.Thermal protection and compensation circuit provides constant current limit over operating range and during under/over temperature cutback; no sudden loss of power under any thermal conditions.
5.Throttle fault protection circuitry disables controller if throttle wires become open.
6.HPD feature prevents controller operation if key is turned on while throttle is applied.
7.Plug braking diode internal to controller.
8.Undervoltage cutback function protects against low battery voltage, including low voltage caused by external loads.
9.Easily programmable through the handheld programmer 1313-4331 or 1314 PC programming station.
Connections:
This is an upgraded controller featuring a J4 connector, designed for status LED indication or programming interfaces.
These controllers have five low-current connections: four 6.35 mm push-on terminals (J1, J2, J3, and J5), and one 4-pin connector (J4).
J1: Keyswitch.
J2: Wire 1 of 2-wire throttle; Pot High of 3-wire or ITS throttle.
J3: Wire 2 of 2-wire throttle; Pot Wiper of 3-wire throttle; Pot Low of ITS thottle; or electronic throttle input.
J4: 4-pin connector, an external Status LED or a programmer can be connected to J4. Note: When J4 is used for a Status LED, a jumper must be added between pins J4-1 and J4-4.
J5: Reverse signal output / main contactor coil driver.
Looking for parts compatible with Curtis controllers? Our inventory includes a comprehensive range of compatible parts. Simply enter your model or part number to find the exact match in our store. Our product specialists are available for support.