[Applicable Models]: "I" type connector track accessories are replacement for H type three wire tracks, suitable voltage: 120V, size: 1.3 x 3.1 x 0.7 inches; Replacement for H type single circuit 3 wire track lighting connectors, replacement for H type 3 wire 1 circuit track; This connector is replacement for H tracks, please purchase it after confirming what type of track you have [Easy to Install]: (1)Locate the grounding point between the connector and the track; (2)Confirm the direction is correct, and then connect the track and connector; (3)Tighten the screws; (4)The installation is completed; The replacement for H track dead end I connector is applied to minimize the track connection space and save space, no additional accessories are required, it can be installed in just a few steps, easily solving the problem when you need to extend the track to cover more areas [Warm Reminder]: after installation, if the track system is not powered on, please check whether the installation has the following abnormalities: 1. Whether the wiring hole on the back of the product is damaged, scratched, or pierced the internal short wire; 2. The "ground wire shrapnel" of this product is not cut off as required; 3. The access direction is wrong and the "ground copper wire" inside the track is not touched, resulting in not grounded [Replacement for H Type Track]: it is 3 wire 1 circuit (single circuit) track lighting system; It has 3 metal clips, two on one side and one on the other; Replacement for H tracks have three; The three types of track lighting parts don't mix and match; This product is not replacement for L- and J-tracks [Quality]: using flame retardant materials, safer to use; Trustworthy quality
Easy to Install
(1) Locate the grounding point between the connector and the track.
(2) Confirm the direction is correct, and then connect the track and connector.
(3) Tighten the screws.
(4) The installation is completed. The replacement for H track dead end I connector is applied to Minimize the track connection gap and save space, no additional accessories are required, it can be installed in just a few steps, easily solving the problem when you need to extend the track to cover more areas.
Warm reminder: After installation, if the track system is not powered on, please check whether the installation has the following abnormalities.
1. Whether the wiring hole on the back of the product is damaged, scratched, or pierced the internal short wire.
2. The "ground wire shrapnel" of this product is not cut off as required.
3. The access direction is wrong and the "ground copper wire" inside the track is not touched, resulting in Not grounded.
Dimensions
Height: 0.7inch
Width: 3.1inch
Depth: 1.3inch
Product Weight: 0.89 lbs
Track Lighting Specifications
System Type: Compatible with H-Track
Accessory Type: Connectors
Connector Type: Replacement for I-Connector
Easy to Install
(1) Locate the grounding point between the connector and the track.
(2) Confirm the direction is correct, and then connect the track and connector.
(3) Tighten the screws.
(4) The installation is completed. The replacement for H track dead end I connector is applied to Minimize the track connection gap and save space, no additional accessories are required, it can be installed in just a few steps, easily solving the problem when you need to extend the track to cover more areas.
Warm reminder: After installation, if the track system is not powered on, please check whether the installation has the following abnormalities.
1. Whether the wiring hole on the back of the product is damaged, scratched, or pierced the internal short wire.
2. The "ground wire shrapnel" of this product is not cut off as required.
3. The access direction is wrong and the "ground copper wire" inside the track is not touched, resulting in Not grounded.
Dimensions
Height: 0.7inch
Width: 3.1inch
Depth: 1.3inch
Product Weight: 0.89 lbs
Track Lighting Specifications
System Type: Compatible with H-Track
Accessory Type: Connectors
Connector Type: Replacement for I-Connector