FIMCO 6 outlet 1 1/4 in. MINI valve has the 6 zone cam installed and includes a 5 zone cam allowing it to have from 5 to 6 active zones depending on the cam selected Requires a 1 - 1-1/2 HP pump with a 5/8 - 1 in. city water meter and a flow rate of 10 - 30 GPM (pump and water meter not included) An anti-siphon valve (not included) is recommended and may be required for safe operation of the FIMCO hydro indexing valve on a city water installation 10 PSI minimum pressure rating Manual and automatic operation 1 valve can replace up to 6 1 1/4 in. solenoid valves Valve has 6 Outlets and 1 Inlet made for 1 1/4" slip fit pipe Only use clear PVC cement (not included) and allow the valve 2 hours to set before subjecting it to internal water pressure, do not use fast setting blue glue as it will rapidly deteriorate the ABS plastic used in construction of the indexing valve, purple primer is similar and must be used only on the PVC pipes and not the valve housing Please remember that pipe size is measured by inside diameter. This valve is made to accept 1 1/4″ pipe so the outlets and inlets will be larger than the pipe size it receives. Manufactured and supported in the USA The Fimco Manufacturing Inc. 1-1/4 in. mini 6 Outlet Indexing Valve offers a reliable and economical way to automate multiple zoned irrigation systems. This Hydro Indexing Valve has 1 inlet and 6 outlets which are all 1-1/4 in. slip fit. The valve can be operated manually or automatically to suit your need. The simple design ensures ease of installation and maintenance. Made and supported in the USA! Please remember that pipe size is measured by inside diameter. This valve is made to accept 1 1/4″ pipe so the outlets and inlets will be larger than the pipe size it receives. Actual inlet and outlet size is 1.66"