FNIRSI DSO-TC3 ingeniously integrates digital oscilloscope, electronic component tester, function signal generator and other functions into one. Equipped with 2.4 Inch TFT display. Built-in rechargeable lithium battery DSO-TC3 handheld oscilloscope, 10 MS/s sampling rate, 500 kHz bandwidth. It can be used freely for both periodic analog signals and aperiodic digital signals. Equipped with one-key AUTO, the measured waveform can be displayed without cumbersome adjustment DSO-TC3 transistor tester can identify and measure various transistors, including NPN and PNP transistors, N-channel and P-channel field effect transistors etc. Automatic detection of pin definition. Automatically analyze NEC protocol infrared code DSO-TC3 transistor tester is suitable for pairing of transistors, identification of mixed surface mount, and preliminary screening of small batch components. "Mos Test" mode can test various types of transistors and test capacitance, resistance etc Other functional modes: Including circuit continuity test, 0-40 V input voltage measurement, PWM output, 0-32 V regulated diode measurement, DS18B20 temperature sensor measurement, DHT11 temperature and humidity sensor measurement Six waveforms: sine, square, pulse stroke, triangle, ramp and DC

Specifications:

Material: ABS

Display: 2.4inch color screen with backlight

Battery: 1 * lithium battery, 1500mAh

Recharging: USB Type-C, 5V

Oscilloscope Specifications:

Real-tim sample rate: 10MS/s

Anolog bandwidth: 0-500kHz

Input resistance: 1MΩ

Coupling: AC/Direct current

Test voltage ranges:

1:1 probe: 80Vpp (±40V)

10:1 probe: 800Vpp (±400V)

Vertical sensitivity: 10mV/Div~10V/Div

Horizontal time base ranges: 1us/Div~10s/Div

Trigger mode: automatic, regular, single

Tigger type: rising edge. falling edge

Waveform freeze: yes

Automatic measurement: yes

Electronic Component Tester Specifications:

Triodes: β is greater than 10 and less than 600

Diodes: Forward voltage drop <4.5V

Reglulated diod: 0.01~4.5V((1-2-3 test area) forward voltage drop, reverse

breakdown voltage); 0.01~32V((K-A-A test area) reverse breakdown voltage)

MOSFET: JFET, IGBT, MOSFET

Capacitance measuring ranges: 25pF~100mF(capacitance value, loss factor Vloss)

Resistance measuring ranges: 0.01Ω~50MΩ

Inductance measuring ranges: 10uH~1000mH

Battery measuring ranges: 0.1~4.5V

Input voltage: 0~40V

DS18B20: 0-85℃ (Temperature)

DHT11: 0-60℃/5-95% (Humidity)

Infrared remote decoding: NEC protocol infrared code

Signal Generator Specifications:

Triangle wave: 1-10KHz/0-3.3V/50%

Square wave: 1-100KHz/3.3V/50%

Pulse wave: 1-100KHz/3.3V/0-100%

Triangle wave: 1-10KHz/0-3.3V/50%

Ramp: 1-10KHz/0-3.3V/0-100%

DC: 0-3.3V