【Good Stability】: The rectangular base and thickened materials make it have good stability, allowing you to use it without worrying about it shaking and tipping. 【Accurate Cutting】: Magnetic positioning ruler, paper pressing wheel on the blade, and paper pressing ruler ensure that the paper is flat and stable, making cutting more accurate. In addition, the clear scale in the horizontal (visible cutting length: 96.5cm/38 inches) and vertical (visible cutting width: 30.5cm/12 inches) directions also allows you to make a precise cut, and you can also use angle guidelines to cut 0°, 15°, 30°, 45°, and 60° corners. 【Thoughtful Design】: Roller cutter head and round blade allow for bi-directional paper cutting, which is very convenient and labor-saving. The aluminum alloy guide rail ensures smooth sliding of the cutter, improving cutting efficiency. 【Convenient to Use】: The whole product and blade are already installed, so you can use it directly after receiving it. What's more, we provide 2 spare blades and a wrench for convenient changing of blades. 【Effortless Cleaning】: The smooth surface and simple structure allow you to easily remove dust and residues with a towel.

Product Description

Application

It is suitable for cutting A3, A4, and A5 paper, photos, cards, decals, and cardboard(within 1mm), labels, card stock, pictures, laminated sheets(within 0.4mm), and PVC film(within 0.3mm). It is ideal for teachers, designers, and hobbyists at home, office,    and school.

Specification

 Model: 24 inch 

Cutting: 61CM 

Discretion: 2mm 

Cutting table: 80*31.5cm The blade is sharp, not only can you cut ten copies of the paper at a time. PVC cards are also easily cut off.

Size: 800*80*315mm (31.5*3.1*12.4in)

Weight: 4kg

Package Included

1* Paper Cutter

2* Spare Blades

1* Wrench

1* Allen Key

1* Positioning Ruler

1* English Manual

Notes

1.Please read the English manual completely before using it, and pay particular attention to the safety instructions included.

1.Before use, please check whether the round blade and lower blade are properly engaged. Occasionally, during transportation or when not in use, the round blade may get stuck between the steel base and the lower blade. If this situation occurs, you can    move the cutter to the middle position, grab the cutter and guide rail on the cutter tightly, and move the round blade back to the outer side of the lower blade. You can also remove the screws from the aluminum support bracket to restore the position    of the round blade. Please be careful to avoid scratching between the two blades.