✅Clean and Efficient Hot Knife:KS EAGLE 150W Electric Hot Knife styrofoam smooth and fast like butter, seal the edges clean, and leave no debris! You can cut the foam board or foam block from any angle and craft into your desired shape. ✅Advantages: Pure copper cutter seat, faster preheating and the blade can be heated to 600 degree in several seconds. The metal hook is safer and more convenient and it can be hung to save the space when not in use.The temperature of hot knife is easily controlled by the temperature control thumb-dial, conveniently mounted on the handle. ✅Multiful Use: The 150W styrofoam cutter cutting machine, suitable for commercial and industrial use, can cut canvas, synthetic fiber, cloth, rope and rope, lightweight foam, KT board pink foam, polyurethane, polyethylene, expanded poly Styrene (EPS) and extruded polystyrene (XPS), polystyrene foam, polyester foam, sponge, rubber, etc. ✅Packing box included： 1pc foam cutter body/ 2pcs 12''Bendable blade/1pcs 6'' blade/1Big Groover/1Cutting Guide/1Small Grooer/1Wire Cutter/1 copper brush/ 1 allen wrench. Ideal for use in architectural modelling, design and DIY projects. ✅ KS EAGLE Quality Guaranty：100% Satisfaction Guarantee for risk-free shopping! 100% 60-day money back and 12-month guaranty. Specification:

Model KS-KIT150B
Voltage AC 110V 50/60Hz
Power Max. 150W
Intermittent Operation 1/3 min
Temp. of Blade up to 600℃ in seconds
Power Cord Length 3m
Product Weight 601g

Installation:
NOTE: Always unplug cord of the Thermal Cutter (Hot knife)before installing or removing the blades. Allow sufficient cooling time for blades, blade holders and metal thumb wheels before handing.

1 - Loosen the screws on the blade holders with the wrench.
2 - Slide the blade under the square pressure plate until snug
3 - Securely tighten screws to assure the proper electrical connection. Do not over-tighten.
4 - Once the blade is firmly in place, plug in the Thermal Cutter (Hot knife) Unit into a standard power supply.

Caution:

- The Thermal Cutter (Hot knife) blade have a sharpened razor edge, for the cleanest cut always cut in the direction on the sharpened edge.
- Excessive power output and heat generation may cause the blade holders to overheat resulting in damage to the unit. Use only the power output for proper cutting. The blade does not need to be red hot to move through foamed plastics.
- Never burn off excess residue on the hot knife blade. The blades will overheat, warping the blade and potentially overheating the Thermal Cutter (Hot knife) .
- Only operate Thermal Cutter (Hot knife)when it is in contact with the insulation board.
- Allow blades to cool before handling. A hot blade may cause injury or burns to exposed surfaces.

Maintenance:

Constant use of the Thermal Cutter (Hot knife)may result in some material build up on blades and the brass holders. This excess material interferes with the proper electrical and impairs the performance of the blades. The brass blade holders and blades can be thoroughly cleaned with a copper brush.