☛ 【Vehicle Compatibility】This Electric Power Window Switch Button is 315.1HZ compatible with 95% of 2003-2007 Accord vehicles. However, due to the various versions of this model, there might be a small percentage of cases where the product does not fit perfectly. In such instances, we provide an alternative installation method to address compatibility issues: remove the chip module from the original car switch and the chip module from our product, then install the original car's chip module into our product, allowing it to function properly in your vehicle. ☛ 【Vehicle Compatibility】Replacement is designed for the Accord models from 2003 to 2007, ☛ 【Replacement Part Number】OEM Part Numbers: 35750-SDA-H12, 35750-SHJ-A24,35750-SDA-HO7, 35750-SDA-H02, 35750-SDA-A12. Please verify your old part against the provided images and product description before purchasing to ensure compatibility with your vehicle. ☛【Important Point to Note】This product is the same as the original installation setup, and can not be installed and used directly, it needs to be programmed, the programming steps are in the fourth picture, if you encounter problems with the installation, please follow the steps. ☛【 Important Note】: Before purchasing this accessory, please verify the OE number and your vehicle model. Additionally, review the description and images to ensure compatibility. There are multiple versions of this switch that may appear identical but have different internal pin configurations. ☛ 【Service】 Please carefully check your vehicle model before purchase. If you have any problems with the power window switch, simply contact us anytime. Our product is 315.1HZ can match 80% of Accord 2003-2007 About instalment: Reminder: Please strictly follow the instructions for installation and matching Attention: The car must be turned off before inserting a new switch. Lifting function Insert the switch, turn the ignition switch to NO [II] or directly start the car. Press and hold the left front button in the second position. [Front left buttion has two position. 1st manual lifting and 2nd automatic lifting] Press down to the second position bottom directly. Don't releaese your hand when the glass reaches the bottom. Continue to press and hold the button for 2-3 seconds, and then directly hook to second position up to the top. When the glass reaches the top, do not release immediately, You need to continue to hold the button and release the handle for 2-3 seconds, and the automatic lifting function of the left front door glass is matched. The glass lifting function of the other three doors do not need to be matched. Key remote control matching 1. Turn the ignition switch to ON [II] and press any remote control button once within 3 seconds; 2. Turn the ignition switch to OFF [O] and then to ON [II], and press any key on the remote control once within 3 seconds 3. Turn the ignition switch to OFF [o] and then to ON [II], and press any key on the remote control once within 3 seconds 4. Turn the ignition switch to OFF [O] and then to ON [II], and press any key on the remote control once within 3 seconds At this point, the door lock will make a sound. Confirm that you hear the door lock sound and press any key on the remote control again. If you hear the door lock sound again, the first key remote control has been successfully matched. Repeat above process if you don't success. 5. Press any key on the other remote control once within 10 seconds, and when you hear the door lock sound, you will successfully match the second key remote control [you can also follow the steps of 1-4 to match the second and third key remote control]. Turn the ignition switch to OFF [o] and complete the vehicle key Master Power Window Switch Compatible with Honda Accord Sedan 2003 2004 2005 2006 2007, Driver Side Master Power Window Switch, Replacement for 35750-SDA-H12, 35750-SHJ-A24