Holds better in soft ground & sand: 17.7" screw-in spiral anchors with 8mm solid steel rod + 1.5" helix are designed to bite into soil, loose dirt, and beach sand for a stronger grip than typical straight tent stakes—great for windy camping and beach setups No hammer, safer install: Twist anchors in using the included M12 T-handle wrench for faster, controlled installation (less slipping vs. pounding stakes) Ratchet guy lines—no knots: 6×8ft adjustable polypropylene ropes let you tighten, lock, and re-tension quickly for tents, canopies, tarps, awnings and sun shelters Outdoor-ready materials: Black powder-coated solid steel helps resist rust; polypropylene lines are lightweight and quick-drying for camping and beach use Complete kit + easy carry: Includes 6 anchors + 6 ratchet ropes + M12 wrench + storage bag for fast setup at campsites, backyards, and the beach Secure your shelter on windy campsites and beach sand with a screw-in system that’s quick to set up and easy to adjust. What you get 4× spiral ground anchors: 17.7 in long, 8mm solid steel rod, 1.5 in helix Black rust-resistant powder coating 4× adjustable guy lines: 8 ft polypropylene ropes with ratchet tensioners M12 T-handle wrench for screw-in installation Storage bag Why screw-in anchors Unlike standard tent stakes that rely on being hammered straight down, the spiral helix is designed to “bite” into the ground for added grip in soil, loose dirt, and sand. The included wrench helps you twist the anchors in with more control—no hammer needed. No-knot, easy tension Ratchet guy lines make it simple to tighten, lock, and re-adjust your setup for tents, canopies, tarps, awnings, sun shelters, and beach tents—especially helpful when wind or ground conditions change. Quick use Twist anchors into the ground with the wrench Attach guy lines to your tent/canopy/tarp points Ratchet to the tension you want and lock in place Note: Holding power depends on ground type and how deep the anchor can be installed; always check tension after wind gusts.