Low noise (<35dB), small size, high efficiency, low power consumption, strong anti-interference ability, stable operation, safe and pollution-free. The stator and circuit board of the motor are potted with epoxy resin and completely isolated from the rotor, which solves the leakage problem caused by long-term diving of the motor-type DC water pump, and is completely waterproof (waterproof grade: IP68). The water pump shaft adopts high-performance ceramics (zirconia), which has high precision and good wear resistance. It adopts the precision matching of high-precision shaft sleeve and ceramic shaft, and has a long service life. Cable length: Approx. 50cm (19.7"); Maximum flow: 800L/H 210 GPH, Maximum llift height: 5M/16ft, Working temperature: 0℃ - 65℃/(32°F - 149°F). Amphibious (installation position is lower than the liquid level for external use). The pump is a centrifugal pump, suitable for fountains, swimming pools, pond, pet aquariums, fish tanks, solar circulation systems, water circulation systems, hydroponic systems, etc. Specifications:
Material: Shell: ABS plastic, Pump shaft: Zirconia ceramic, Rotor: Ferrite, POM
Power supply: solar panel, battery, adapter, power module
Drive mode: Brushless, magnetic isolation
Power consumption: 19W
Rated voltage: 12V
Rated current: 1.5A
Max flow rate: 800L/H(210GPH)
Max lift height: 5M/16ft
Diameter of inlet: 16mm/0.63"
Diameter of outlet: 11.8mm/0.46"
Noise: <35dB
Waterproof level: IP68
Lifespan: More than 30,000hrs
Working temperature: 0℃ - 65℃/(32°F - 149°F)
Item dimension: 77*63*49mm
Weight:220g(7.8ounces)
Cable length: Approx. 50cm (19.7")
Wiring: The red wire is connected to the positive pole of the power supply, and the black wire is connected to the negative pole of the power supply.
Note:
1, This is a submersible centrifugal water pump. It must be immersed in the water, or the water level of the external water source must be lower than the water inlet nozzle of the water pump when the pipeline is connected, so that the air after the water pump is discharged and the water is pumped normally.
2, The head of the water pump is the maximum water delivery height, that is, the flow rate to the maximum head point is zero.
3. This pump cannot work without water for a long time.
Package includes:
1 x 12 V brushless water pump
Material: Shell: ABS plastic, Pump shaft: Zirconia ceramic, Rotor: Ferrite, POM
Power supply: solar panel, battery, adapter, power module
Drive mode: Brushless, magnetic isolation
Power consumption: 19W
Rated voltage: 12V
Rated current: 1.5A
Max flow rate: 800L/H(210GPH)
Max lift height: 5M/16ft
Diameter of inlet: 16mm/0.63"
Diameter of outlet: 11.8mm/0.46"
Noise: <35dB
Waterproof level: IP68
Lifespan: More than 30,000hrs
Working temperature: 0℃ - 65℃/(32°F - 149°F)
Item dimension: 77*63*49mm
Weight:220g(7.8ounces)
Cable length: Approx. 50cm (19.7")
Wiring: The red wire is connected to the positive pole of the power supply, and the black wire is connected to the negative pole of the power supply.
Note:
1, This is a submersible centrifugal water pump. It must be immersed in the water, or the water level of the external water source must be lower than the water inlet nozzle of the water pump when the pipeline is connected, so that the air after the water pump is discharged and the water is pumped normally.
2, The head of the water pump is the maximum water delivery height, that is, the flow rate to the maximum head point is zero.
3. This pump cannot work without water for a long time.
Package includes:
1 x 12 V brushless water pump