Equipped with O4 Air Unit Pro for crystal-clear real-time 1080P/100fps video transmission. Features a 1/1.3-inch sensor supporting 4K/120fps recording, optimized for sharp visuals and enhanced low-light performance. New aluminum camera mount with molded silicone damping minimizes vibrations and resonance, ensuring stable footage even during dynamic flights. TAKER F722 BT 32Bit 50A stack paired with 2107.5 1960KV motors delivers smooth, responsive thrust and ultra-stable flight control. Quick-release arms enable two-screw swaps for effortless repairs. Dedicated compartments for capacitor and buzzer enhance operational stability. Optimized frame damping protects electronics from vibrations and prolongs component lifespan.
Specifications
Wide X Version
- Model: MARK5 O4 Pro Wide X FPV
- Wheelbase: 225mm
- VTX: O4 Air Unit Pro VTX module
- Camera: O4 Air Unit Pro camera module
- Antenna: O4 Air Unit Pro Antenna
- Motor: SPEEDX2 2107.5 1960KV
- Prop: Gemfan 5136
- FC: GEP-F722-BT-HD V3
- MCU: STM32F722
- IMU: ICM42688-P(SPI)
- OSD: BetaFlight OSD w / AT7456E chip
- ESC: GEP-BL32 50A 96K 4IN1 ESC
- Power Connector: XT60H-M
- Receiver: PNP / ELRS 2.4G / TBS NanoRX
- Recommended Battery: LiPo 6S 1050mAh-1550mAh
- Printouts Color: emerald green
- Weight: 414g ± 5g
- Flight Time: 6-8 minutes（Based on slow cruising tests, the actual may vary due to product differences, firmware version, flying style, and environment. For reference only）
Includes
1 x GEPRC MARK5 O4 Pro FPV
1 x Gemfan 5136（2CW 2CCW）
1 x 15*250mm strap
2 x 20*250mm straps
2 x Battery anti-slip pads
1 x 3D printouts pack
1 x Spare screw pack
1 x L-shaped screwdriver 1.5mm
1 x L-shaped screwdriver 2mm
1 x L-shaped screwdriver 3mm
1 x M8 wrench
Spare Screws Included:
1 x M5 Flange Nylon Knurled Nut
2 x M2 Stainless Steel Press-fit Nuts
1 x M5*25 Stainless Steel Button Head Hex Screw
4 x M3*10 Button Head Hex Screws
4 x M3*8 Button Head Hex Screws
2 x M3*8 Countersunk Hex Screws
2 x M3*5 Countersunk Hex Screws