Replacement for Kawasaki vulcan 500, bayou 220 / Replacement for Yamaha big bear 400, bruin 350, raptor 350 / Replacement for Suzuki eiger 400, ozark 250 Replacement for Kawasaki KLF300 Bayou 2X4 1988-2004, Suzuki LTZ400, Quadsport z400; Yamaha YFB250 / YFM350 / YFM400 Compatible with Yamaha: Big Bear, Timberwolf, Maine, Carriers, Bear Tracker, Bruin, Moto-4, Grizzly, Wolverine, year 1987 and up GLENPARTS Fuel Gas Petcock Valve Switch Pump Replacement for Kawasaki KLX 125 KLX125 2003 2004 2005
SPECIFICATIONS:
High-quality gas fuel tank petcock. Color: silver. Replaces existing fuel petcock for a perfect fit, Just replace and ride again. Manufactured to exact measurements to meet or exceed OEM specification. Package include: 1 x fuel petcock
3 positions switch: ON
OFF
RES ON: allow you to operate with normal fill-ups OFF: completely shuts off gas flow RES: allow you to access the lower portion of the gas tank when gas level is low
INSTALLATION:
1. Fuel Petcock Valve replacement on Gas Generator
2. Prepare to drain fuel by raising the aft end
3. Position catch bowl for draining fuel
4. Squeeze compression clip and slide off fuel line
5. Remove fuel line and insert into drain tube
6. Turn petcock to drain fuel
7. Clean fuel of any debris or water accumulation
8. Pour into fuel-safe container
9. Loosen petcock mounting nut
10. Remove petcock and filter
11. Debris should be cleaned during annual service
12. Insert filter and position petcock, take care to avoid crossing threads
13. Tighten nut gently
14. Re-attach fuel supply line
SPECIFICATIONS:
High-quality gas fuel tank petcock. Color: silver. Replaces existing fuel petcock for a perfect fit, Just replace and ride again. Manufactured to exact measurements to meet or exceed OEM specification. Package include: 1 x fuel petcock
3 positions switch: ON
OFF
RES ON: allow you to operate with normal fill-ups OFF: completely shuts off gas flow RES: allow you to access the lower portion of the gas tank when gas level is low
INSTALLATION:
1. Fuel Petcock Valve replacement on Gas Generator
2. Prepare to drain fuel by raising the aft end
3. Position catch bowl for draining fuel
4. Squeeze compression clip and slide off fuel line
5. Remove fuel line and insert into drain tube
6. Turn petcock to drain fuel
7. Clean fuel of any debris or water accumulation
8. Pour into fuel-safe container
9. Loosen petcock mounting nut
10. Remove petcock and filter
11. Debris should be cleaned during annual service
12. Insert filter and position petcock, take care to avoid crossing threads
13. Tighten nut gently
14. Re-attach fuel supply line