【Compatibility】The MKP-38 trolling motor propeller fit for minn kota engine mount 112lb thrust motors Fortrex 112;Terrova 112;Ulterra 112;Riptide ST 112;Riptide SF 112;Riptide 112.Trolling motor propeller compatible with minn kota trolling motor prop MKP-38 weedless wedge 2, Trolling motor prop fits 4-1/2" motor diameters. 【Product Details】MKP-38 weedless wedge 2 prop replacement for minnkota part number #2341160 #1865023. Motor prop lower unit diameter 4-1/2", prop drive pin length 0.99", motor prop nut thread diameter 0.33", washer inner diameter 0.41". Include one socket wrench (Suitable for motor prop nut). The propeller also has curved winglets on the edge of the blades for better and easier weeding. 【High Performance】Replacement for minn kota weedless wedge 2 prop and shear pin nut kits are made from top quality material, high strength, prevent corrosion and rust, wear and impact resistance, sturdy and durable. High precision and hardness ensure long term reliable service. Replacement for minnkota weedless wedge 2 propeller features a unique design with swept-back and flared blades that "wedge" weeds away while conserving battery power. 【Easy Installation】How to install trolling motor propeller？First disconnect the motor from the battery; Second remove prop nut and washer, turn the old prop to horizontal and pull it straight off; And then align new propeller with the drive pin, install prop washer and prop nut; Last tighten prop nut 1/4 turn past snug.(Be careful, over tightening prop nut can damage prop.) 【After-Sales Service】If you have any questions about the MKP-38 trolling motor propeller and shear pin nut kit, installation and other aspects of the product, you can send us an email at any time, and we will reply within 24 hours. GRONGU MKP-38 Trolling Motor Prop 1865023 2341160 with Nut Kit "E" Kit Fits 4-1/2" Motor Diameters for 112lb Thrust Models, Trolling Motor Prop Kit

Product Details
Package Include
1 × Trolling motor prop (lower unit diameter 4-1/2")
1 × Motor prop shear pin (length 0.99")
1 × Motor prop nut (thread diameter 0.33")
1 × Washer (inner diameter 0.41")
1 × Socket wrench (Suitable for motor prop nut)

Compatibility
Trolling motor propeller compatible with minn kota engine mount 112lb thrust motors; Fits 4-1/2" motor diameters.
Trolling motor prop MKP-38 replacement for Minn Kota part number #2341160 #1865023.

Propeller Replacement:
1. Disconnect the motor from the battery.
2. Hold the propeller and loosen prop nut with pliers or wrench.
3. Remove prop nut and washer. If drive pin is sheared, hold the shaft steady with a screwdriver blade pressed into the slot on end of shaft.
4. Turn the old prop to horizontal (as illutrated) and pull it straight off. If drive pin falls out, push it back in.
5. Align new propeller with the drive pin.
6. Install prop washer and prop nut.
7. Tighten prop nut 1/4 turn past snug. [25 -35 inch pounds ]
Be careful, over tightening prop nut can damage prop.