Pro Design - Principle of leverage to design the slide hammer dent puller is ergonomic, efficient and labor. Works with hot melt glue to pull the dents out. So we suggest user buy hot melt glue gun and glue sticks to work with our dent repair tool. Paintless Repair - The T-bar dent puller is made of tempered high-carbon stainless steel and standard stainless steel. In the parts of the body contact with high-quality rubber precision package, can avoid damage to the original paint. Widely used - Dent puller kit is suitable for most of big dents. Efficient action on automobile and other metal surface dents. For DIY - Dent removal tool is coming with detailed repair steps introduction for operating, it makes the dent removal process easily. Our car dent puller can help you repair dents quickly by yourself for many times.(No glue gun and glue sticks included.) Customer Service - Please read the product description and manual carefully before use. How to use:
1.Clean the dent with a clean wet cloth;
2.Mount the glue stick into the glue gun,pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes;
3.Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the drawing gasket is, the larger the drawing force is);
4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue);
5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter);
6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;
7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen;
8. Clean the repaired place with a clean wet cloth.
Package Contents:
1* Car Dent Puller Tools
18* Blue Glue Tabs/ Lifter Glue Puller
Only the above package content, other products are not included.
1.Clean the dent with a clean wet cloth;
2.Mount the glue stick into the glue gun,pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes;
3.Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the drawing gasket is, the larger the drawing force is);
4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue);
5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter);
6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;
7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen;
8. Clean the repaired place with a clean wet cloth.
Package Contents:
1* Car Dent Puller Tools
18* Blue Glue Tabs/ Lifter Glue Puller
Only the above package content, other products are not included.