Application
This product is mainly used for home lawn mowing,orchard mowing,tea garden mowing,cutting rice and wheat,cutting corn stalks,reed harvesting,pond side weed removal,bushes cutting,etc.,and mostly used in agriculture,forestry,landscaping,and urban greening.
Specification
Color:Red,Silver
Material:PP,Aluminum Alloy,Manganese Steel,Nylon
Assembly Required:Yes
Usage:Side-mounted
Displacement:35.88CC
Power:0.75kw
Rotation Speed:8500r/min
Idling Speed:2800-3000r/min
Engine Type:4-stroke Gasoline Engine
Carburetor Type:Diaphragm Carburetor
Gasoline Tank Volume:650ml/22 Oz
Oil Tank Volume:80ml/2.7 Oz
Engine Size:26*22*27cm/10.24*8.66*10.63in
Product Length:1.75m/5.74ft
Gross Weight:8.5kg/18.74 lbs
Package Size:105*25*25 cm/41.34*9.84*9.84 in
Details
Large Fuel Tank:The 22&2.7 oz fuel tanks ensure long-term use without frequent refueling.
Grass Baffle:It can effectively prevent the broken grass from splashing around when mowing the lawn,thus making it easier to clean up the lawn after mowing and ensuring your safety.
Funnel:The red funnel makes it easier to add fuel and less likely to leak.
Starting Method
1.Just add four-stroke gasoline engine oil to the oil tank to the bottom thread.
2.Add 93 unleaded gasoline to the fuel tank.
3.Press the oil bubble to pump oil until the oil bubble is full of fuel and the fuel return pipe returns oil.
4.Put the flameout switch in the"I"position(0 for flameout,I for start).
5.Toggle the damper upward to close the damper(hot start does not need to close the damper).
6.Pull the starter puller at a constant speed until it starts(if there is a start response after pulling 5 times but it fails to start,please pull the damper to the following to open the damper in pulling).
7.After the engine starts,pull the damper to the bottom to open the damper,slowly pull the throttle trigger,lightly add oil to the throttle and test whether it is normal.
Package Included
1*Weed Wacker
1*Oil Pot
1*Funnel
1 Pair*Goggles
1*Carrying Strap
1*English Manual
All Accessories for Installation
Notes
1. The oil mixture ratio should not be wrong or deviated.Please do not use poor-quality motor oil as the matching motor oil.
2. Please check whether the blade tool is firmly installed before starting the engine,and check whether the blade tool is intact after each work.When starting the engine,personnel need to stay away from 32.81ft or more.Please wear gloves(not included)and goggles during use.
3. Please change the engine oil of the new machine every 4 hours of work and every 20 hours of work after 5 times(change the oil when the engine is warm).Please check the oil before each work to see if it is missing and add it to the right position.Fuel needs to be replenished as it is used.Refueling should be kept away from the fire source for more than 49.21ft,and open flame operation such as smoking is prohibited.
4. The sponge filter in the air filter needs to be cleaned at least once every 50 hours of operation.It can be cleaned with detergent,rinsed with water,and reinstalled after the air filter is dry.
5. Before switching off the engine,it should be idled for 1-2 minutes to facilitate the natural heat dissipation of the engine.
6. Add grease to the blade work head gear box every 20 hours to provide internal gear lubrication,reduce wear and tear,and impr