Resolution 10mHz (0.01Hz); Accuracy ±5×10-6; Stability ±1×10-6/ 3 hours Sine wave up to 20Mhz ampling Rate 200MSa/s; Vertical Resolution 12 bits Display LCD1602 USB to Serial interface; Communicating Speed: 9600bps; Protocol: Command line mode, protocol complete open. Specifications
SGP3002(2MHz)
SGP3005(5MHz)
SGP3010(10MHz)
SGP3015(15MHz)
Resolution 10mHz (0.01Hz)
Accuracy ±5×10-6
Stability ±1×10-6/ 3 hours
Impedance 50Ω±10%（Typical）
Waveforms Sine, Square, Triangle, Sawtooth, Pulse, 4 square pulse, 8 square pulse
Waveform Length 2048 points
ampling Rate 200MSa/s
Vertical Resolution 12 bits
Sine Harmonic Suppression ≥45dBc(<1MHz);≥40dBc(1MHz~20MHz);
Output characteristics
Amplitude 10mVpp~20Vpp
Amplitude Resolution 1mV(Attenuate 20dB)
Amplitude Stability ±0.5%/ 5h
Amplitude flatness ±5%(<10MHz)；±10%(>10MHz);
Waveform Output
Impedance 50Ω±10%（Typical）
Protection All terminals can work more than 60 seconds when the load is short-circuited
Dc Offset
Offset Range ±10V
Offset Resolution 0.01V (0.001V Attenuated)
TTL output
Electrical Level Amplitude >5Vpp
Fan-out >20 TTL Load
Rise/Fall Time ≤20ns
CMOS output
Low Electric Level <0.3V
High Electric Level 1V~10V
Rise/Fall Time ≤20ns
External Measurement
Frequency Meter Range 1Hz~60MHz
Sensitivity Gate Time 1S
Counter Range 0-4294967295
Coupling AC
Working Mode Manual
Voltage Input Range 0.7Vpp~20Vpp
Sweep
Sweep Type Linear, Logarithm
Sweep Objects Frequency
Sweep Time 1S~999S/Step
Sweep Range Starting position and Finishing position can be set arbitrarily.