This led dimmer switch can be used for led lights of voltage from 5V to 24V.Pls make sure your driver is a constant voltage driver since it can be connected to constant voltage driver only.And this led dimmer switch must cannot be connected to the constant current driver.You can check the picture to see details Touch dimmer switch for led lights,just touch it.Short press to turn on and off the led lights slowly, Long press to stepless dimming and control your light.It has memory funtion.When you turn on the light again,the light brightness will be the same as last time automatically.A blue indicator light will be always on to help you find the switch in the dark night JUST a small led dimmer, it won't take up too much place.This led dimmer is recessed installation,its hole size is 17mm/0.67".You can use it to dimming your Interior Lights,to your RV,auto,camper,cabinet,kitchen,bedroom.This led dimmer will help you adjust the light to a very low brightness in the dark night instead of turn off the lamp This touch dimmer switch for lamp, maximum power 5V15W、12V36W、24V72W.It is widely used to control the led light. Don't exceed the rating amps and volts Package includes 3 Pack touch dimmer switch for led lamp

Package includes:

• 1*LED Dimmer Switch
• 1*Instruction

Important Note:

• The dimmer light switch is rated for 5A MAX /DC5-24V.
• The single pole dimmer switch is only used for indoor and can't be installed in metal material.
• If you meet the static electricity problem, you can let the dimmer switch housing be grounded.
• The dimmable light switch doesn't work with wet or damp fingers.

If the LED Light is always on after the wire is connected, the switch cannot be controlled.The reasons are as follows:

• a.The positive and negative poles are reversed;
• b.The input and output are reversed;
• c.The working voltage does not match.
• The most commonly used types of dimmers are 5V dimmer switch, 12V dimmer switch, 24V dimmer switch

Specifications:

• Type:Dimmer switch for LED lights
• Head diameter: 0.787in/(20mm) touch lamp switch
• Mounting hole size: 0.67in/(17mm)
• Switch Type: LED strip dimmer Stepless Dimming
• Input Voltage: DC 5V-24V
• Output Current: 5A MAX
• LED voltage: DC 5V-24V
• LED color: Blue (always ON)
• Enclosure material: Stainless Steel
• Drotection level: IK10(touch lamp control module)
• Operating Temperature: -20℃ ～ +55℃