[Application]: This welding machine is designed to perform operations in the car body repair shop,can weld studs of various materials of M3-M6,especially in the maintenance of aluminum car bodies. Featured with short welding time,little heat impact on the base material, no damage to the base material surface, good welding quality. [Adjustable pressure welding gun]: Different rules of stud required welding force is different, so the pressure of the welding gun is adjustable according to needs. [Professional workbench]: The use of high-strength galvanized plate, tools more convenient storage. [High Quality]: 50㎡ oxygen-free copper cable is used ,discharge current is faster than double lap iron. with all-aluminum labor-saving pull frame to prolong the service life. [Easy to Operate]: Knob adjustment control panel, simple function selection, easy to operate. Intelligent matching welding mode featured with fast arcing, deep melting pool, solid welding,easily cope with a variety of complex welding needs. Product parameter:
Voltage: 220V
Instantaneous current: 11000A
Rated power: 1.5KW
Screw size: M3/4/5/6
Capacitance: 12mF
Operation method:
1. First select the appropriate welding tip according to the size of the stud, adjust the positioning screw in the welding tip, then insert it into the gun head of the welding torch, and tighten it carefully with a wrench. Then insert the stud to observe, the stud should be 5-8mm higher than the three support rods of the welding torch. Then connect the 220V power supply, and make the welding machine reliable grounding. Turn on the power switch, the digital meter displays the welding voltage, adjust the "voltage adjustment" knob to the appropriate voltage according to the size of the stud used. The specifications and voltage matching can be fine-tuned as follows:
M3: 45V
M4: 70V
M5: 100V
M6: 130V
2. Remove oil and rust on the work piece to avoid spark splashing or weak welding due to poor contact.
3. The stud is installed in the gun mouth. Make the welding gun perpendicular to the base material and exerts a slight pressure.
4. Press the micro switch on the handle of the torch, and the welding will be completed after a "pop".
5. Adjust different voltages and observe the welding effect, subject to the firmness of the welding and the welding place is well connected and flat.
6. Adjust the voltage according to the above experiment results and then welding.
7. The larger the output voltage, the larger the diameter of the welded stud.
8. As for the repairing of sheet metal, after welding, screw the pulling ring on the stud, and use a pulling tools with a thermal spray gun to heat the damaged part and flatten the sheet metal.
Voltage: 220V
Instantaneous current: 11000A
Rated power: 1.5KW
Screw size: M3/4/5/6
Capacitance: 12mF
Operation method:
1. First select the appropriate welding tip according to the size of the stud, adjust the positioning screw in the welding tip, then insert it into the gun head of the welding torch, and tighten it carefully with a wrench. Then insert the stud to observe, the stud should be 5-8mm higher than the three support rods of the welding torch. Then connect the 220V power supply, and make the welding machine reliable grounding. Turn on the power switch, the digital meter displays the welding voltage, adjust the "voltage adjustment" knob to the appropriate voltage according to the size of the stud used. The specifications and voltage matching can be fine-tuned as follows:
M3: 45V
M4: 70V
M5: 100V
M6: 130V
2. Remove oil and rust on the work piece to avoid spark splashing or weak welding due to poor contact.
3. The stud is installed in the gun mouth. Make the welding gun perpendicular to the base material and exerts a slight pressure.
4. Press the micro switch on the handle of the torch, and the welding will be completed after a "pop".
5. Adjust different voltages and observe the welding effect, subject to the firmness of the welding and the welding place is well connected and flat.
6. Adjust the voltage according to the above experiment results and then welding.
7. The larger the output voltage, the larger the diameter of the welded stud.
8. As for the repairing of sheet metal, after welding, screw the pulling ring on the stud, and use a pulling tools with a thermal spray gun to heat the damaged part and flatten the sheet metal.