COMPLETE MINI SPLIT COIL CLEANER SOLUTION - This kit has everything you need to deeply clean your ductless mini split air conditioner evaporator coil. Including a patented 360 coverage transparent mini split ac cleaning bag cover, Foam Blaster coil cleaner, Flow Tab drain treatment tablet, industrial duty spray gun, 9” angled spray wand, fan spray nozzle, collapsible bucket, and a 17-piece adapter to garden hose connection kit. Our expanding hose is sold separately. CLEAN EASIER, BETTER, DEEPER - Our patented 360 Degree Coverage Cleaning Cover installs easily and will prevent water overspray to surrounding areas. The Mini Split Maintenance Kit allows you to clean your mini split easier and deeper to restore peak efficiency and indoor air quality. COMPATIBLE WITH ALL MINI SPLIT SYSTEMS - Our kit is a universal fit for all ductless mini split air conditioners. The Patented 360 Degree Cleaning Cover is adjustable to fit all sizes of mini splits. Also included is our 17-Piece Garden Hose to Faucet adaptor Kit. Virtually any household faucet can be connected to a garden hose using our supplied adapters. This allows you to pressure rinse your mini split evaporator with our Spray Gun and Wand to achieve maximum penetration and cleaning. DESIGNED BY AMERICAN HVAC PROFESSIONALS - This kit has been designed for commercial use, durability, and can be reused over and over again when properly cared for. We developed this kit from our many years in the field struggling to find the best way to clean mini split systems without uninstalling them from the wall. This is the same kit that we use in our own maintenance jobs. INCLUDED AC COIL CLEANER - The Foam Blaster Aerosol Coil Cleaner penetrates deep into the coil to emulsify dirt and contaminants. After applying the coil cleaner, connect our Spray Gun, Wand, and Adapter Kit to your faucet to pressure rinse even the most stubborn gunk and hard to reach parts of the coil. After cleaning, apply our Flow Tab to your drain pan to keep it clean, and flowing. Before cleaning, make sure to remove all sensitive electronics around and below the mini split evaporator. Make sure the air conditioner is powered off. Shut off the breaker and make sure there is no electricity to the evaporator. Remove the air filters and plastic cover of the air conditioner to gain access to the evaporator coil. Remove the plastic Mini Split Cleaning Cover from the packaging and unfold it completely. Locate the black wheel lock and pull on the elastic drawstring gently to resize the Cleaning Cover for your mini split. If the drawstring becomes difficult to pull, you may need to loosen the plastic folds around the perimeter of the drawstring. Install Cleaning Cover: Once approximately sized, install the Mini Split Cleaning Cover onto the air conditioner evaporator. Hold the wheel lock and pull on the drawstring so that the cover fits tightly around the evaporator. NOTE: Pay close attention to make sure there are no gaps where water may leak out between the air conditioner and bag. Cover Exposed Electronics: Identify any exposed electronics and cover them with plastic (not included). Make sure that no chemical or water overspray touches the exposed electronics. Bucket Placement: Unfold the collapsible bucket under the mini split and position the Cleaning Cover hose into the bucket. The Cleaning Cover hose can be trimmed to a length that will allow the water to leave the hose and enter the bucket. Inspect the water faucet that you will use. Hose Adapter Connection: If your faucet is equipped with an adapter, this will need to be removed. Then, using the included set of faucet adapters, select the appropriate size adapter to use in place of your adapter. We have included a selection of gaskets to prevent this connection from leaking. Select the appropriate gasket(s) for your application. Connect the water hose to the faucet. If your adapter is non-removable, we have included a compression style adapter. Not all faucet outlets will be compatible with this compression style adapter. When using the compression style adapter, BE SURE THE CONNECTION IS SECURE AND WILL NOT SLIP OFF OF THE FAUCET WHEN THE HOSE IS PRESSURIZED. Leak Test: Connect the water hose securely to the Spray Gun. Turn on the water faucet and allow water to completely fill the hose. Depress the Spray Gun trigger into the sink and check for any leaks. Shake the Foam Blaster can vigorously. Application to Evaporator: Spray the Foam Blaster onto the air conditioner evaporator coil. Completely cover the evaporator coil with foam. Additionally, spray the Foam Blaster to cover as much of the blower wheel as possible. Let the Foam Blaster cleaner penetrate the evaporator coil and blower wheel for 10 to 15 minutes. During this time, you will notice the foam slowly converting into a liquid state. This will allow the cleaner to absorb into and emulsify the dirt and debris. Air Filter Cleaning: Using pressurized water in a separate location such as a si