Stunning Visual Effects: The coil generates impressive electrical arcs, with a visible arc length of over 13 cm/5.11 inch. It creates a dramatic lightning-like effect that is both educational and entertaining. User needs: After turning on, please check the red running light in the middle. If the red light is on, you can start using the device safely. If the red light does not light up or goes out during use, it is prohibited to use. Please pay attention to the voltage display during use, when it shows 12.4V, it means fully charged. When it shows about 10.5V, please charge it immediately, otherwise the item may be damaged. User-Friendly Operation: The one-button activation allows for easy operation, making it ideal for educational use, exhibitions, or as a conversation starter in any collection. Portable and Convenient: With its compact design, the handheld coil is easy to carry and use, perfect for science enthusiasts and DIY creators who enjoy hands-on experiments. Safety Features: The UHF arc generated by the equipment has a very obvious high-frequency current skin tending effect, therefore, the arc it produces is touchable, and when touched, but there is still a faint sense of pain, ensuring a fun yet secure experience for users. Use note:
Please pay attention to the voltage on the voltmeter during use
Display, when 12.4V is displayed, it is fully charged; when displayed
When around 10.5V, please be sure to use it after charging. No
It will directly damage the item.
User needs:
1. When the user uses the device for the first time, it may happen that the arc trigger switch is pressed and the arc fails, and the LED2 on the function panel can be observed, that is, the SRT indicator is off. If this happens, the user It is necessary to turn off the power switch and turn it on again to release the protection state of the device until the RST indicator on the function panel lights up again.
2. After the RST indicator lights up again, the user needs to touch the discharge needle of the device, and then try to trigger the arc trigger switch again to assist the startup of the device. This process can be tried several times until the device can emit arcs normally.
3. If the RST indicator suddenly turns off during use, users can try to turn off the power switch and restart the device again to restore to normal.
Specification:
- Category: Manual DIY assembly works
- Power supply: 12.6V lithium pack 2900mA
- Charging: AC110V-240V
- Endurance: ≥10000 times
- Frequency: 1.1-1.3Mhz
- Size: Length 20cm Width 7.1cm Height 18cm
- Arc: 13cm
Package:
- 1pcs x Portable Trigger Mode Tesla Coil Handheld Tesla Coil Artificial Lightning DIY
Please pay attention to the voltage on the voltmeter during use
Display, when 12.4V is displayed, it is fully charged; when displayed
When around 10.5V, please be sure to use it after charging. No
It will directly damage the item.
User needs:
1. When the user uses the device for the first time, it may happen that the arc trigger switch is pressed and the arc fails, and the LED2 on the function panel can be observed, that is, the SRT indicator is off. If this happens, the user It is necessary to turn off the power switch and turn it on again to release the protection state of the device until the RST indicator on the function panel lights up again.
2. After the RST indicator lights up again, the user needs to touch the discharge needle of the device, and then try to trigger the arc trigger switch again to assist the startup of the device. This process can be tried several times until the device can emit arcs normally.
3. If the RST indicator suddenly turns off during use, users can try to turn off the power switch and restart the device again to restore to normal.
Specification:
- Category: Manual DIY assembly works
- Power supply: 12.6V lithium pack 2900mA
- Charging: AC110V-240V
- Endurance: ≥10000 times
- Frequency: 1.1-1.3Mhz
- Size: Length 20cm Width 7.1cm Height 18cm
- Arc: 13cm
Package:
- 1pcs x Portable Trigger Mode Tesla Coil Handheld Tesla Coil Artificial Lightning DIY