1. Product advantages:heavy duty leveling leg, Bear a load ofear a load of 1200lb. The base has non-slip pads to prevent the device from shaking on uneven ground and reduce vibration. Product Material: heavy adjustable leveling feet of carbon steel, with chrome plated surface treatment,The base has anti-skid pads 2. threaded leveling feet size:Total Height: 90 mm/3.5", The pitch for an m10 leveling feet thread is 1.5 millimeters (mm). Screw length is 50 mm/1.96 inches, and base diameter is 50 mm/1.96 inches 3. heavy duty leveling feet Scope of use: These adjustable leveling feet are applicable for all types of furniture at home, office, school, restaurant, bar, eadjustable feet for pool table,washing machine leveling feet,etc 4.leveling legs Easy Installation：to know the leveling Feet are the right size for your furniture，Drill a 2" deep hole by using 0.47" drill biton the furniture leg with an electric drill, then insert the T- nut ( tightened with a hammer ) and screw in the leg levelers. If it is a metal leg, you need to weld a m10/0.39" threaded insert first, and then install the leveling feet 5. Package Contains:4 x Leveling Feet,4xsturdy t -nut and 4xlock nut，Package Contains:4 x Leveling Feet,4xsturdy t -nut and 4x lock nut it can protect the floor from scratches and no noise when moving the home. Adjustable furniture leveling feet can adjust the height of the four feet of the furniture, so that the furniture can reach the height you want Easy to Install or Replace：
Replace the original leveling feet by unscrewing them and fastening the new ones. For furniture legs without screw holes, drill a 0.47” hole with a depth greater than 2". Then insert the T- nut so you can screw in the leg levelers. For a metal leg, you may weld a 0.39" threaded insert on it and then screw in the leveler.