20+Min Flight Time: 16V brushless motor configuration. Compared to traditional 12V, it has stronger power. Combined with ESC optimized for the characteristics of the motor, the flight efficiency is greatly improved High performance servo: High performance servo with corelessmotor, 4KG. cm torque, 0.12sec/60 ° high-speed response. Helicopters respond quickly. Elliptical output shaft design, no need to debug servo arm Tail High-Speed Brushless Motor: The tail adopts a high-speed brushless motor, paired with a specially designed high-efficiency tail rotor, with sufficient power and fast response; Modular design, easy maintenance: Quickly remove the battery compartment and replace the battery without removing the rain shelter. Quick detachable tailpipe design, easy to carry. Stable Fly: The FW450L-V3 is equipped with a new M10N positioning system and a high precision IMU attitude calculation unit with a barometer, which makes the heli almost as simple and easy to fly as the drone in GPS mode. It has the flight experience of putting the stick and stopping when the stick is released. Smart Acrobatic Mode: On acrobatic mode, FW450-V3 will complete invert then hovering by flipping the switch. And you also can learn the method of inverted flight.(please select the expert invert flight on software. GPS Mode: Its logic is similar to that of the traditional UAV. It supports the M10N positioning aid and the air pressure altitude aid. It can hover at a fixed point and altitude in the open ground, push the rod and go, release the rod and stop. It is easy to operate, fly without hurry, and calm down. 3D Manual Mode: The advanced manual mode does not limit the flight angle, and has greater freedom of operation. It can achieve a variety of flight postures such as inverted flight, spin flip, etc. The tension of acrobatic flight is revealed in this mode. One key/low voltage return: The FW450L V3 has the functions of one key return and low power return. After taking off in an open field, just toggle the return switch, and the heli will auto return to the takeoff point and land and stall. When the power reaches the set voltage value, the heli will also return auto. ( The set reserved power needs to be enough for return flight ) *** Specification:
- Body Length: 700mm
- Body Height: 195mm
- Body Width: 120mm
- Tail Blade: 154mm
- Main Blade: 360mm
- Main Rotor Wingspan: 805mm
- Flying Weight (without battery): 790g
- Main motor Gear : 13T
- Main drive gear: 81T
- Main motor: Brushless motor (2816)
- Tail motor: Brushless motor (2008)
- ESC : 60A Double Brushless ESC
- Flight mode:
+ GPS mode
+ 3D manual mode
+ One-key return
+ Low-power return
+ Fail safe
+ One key to invert flight
+ Semi-auto fly (O figure fly, 8 figure fly)
- Position module: multi-mode GPS
- Hover:
Level: +-1.5m (GPS normal)
Vertical: +-0.5m (GPS normal)

*** Package includes:
- Transmitter
- Suitcase
- Battery
- Charger
- Instructions
- Screwdrive
- FW450 V3 Heliccopter Kit