【DIESEL COMMON-INJECTOR TESTER】- Used to test nozzle opening pressure and vibration. Leak testing and spray patterns. Fogging and chatter characteristics testing.It can meet the needs of technicians for simple test equipment. 【EXCELLENT WORKMANSHIP】-The common rail injector tester uses imported PWM control chips, which can be used for various working states of the injector. It uses a digital display panel, which is easy to operate and has good test results. 【EASY TO CARRY】-Package size: 47*37*26cm, weight: 5kg.The detector is small in size and easy to carry. It can help customers deal with common rail injectors on the go, greatly improving work efficiency. 【FEATURES】-It can simulate the driving signal of the control unit to the injector, such as pre-injection, discharge point, full load point and other conditions. 【APPLICABLE MODELS】- Diesel engine vehicles. These diesel injector testers are suitable for all types of diesel injectors except common rail (CRDI) diesel injectors. ▶Describe:
1. The CR-C multifunctional common rail injector tester adopts the control chip imported from Germany, which can accurately and effectively simulate the ECU driving signals of the injector in each working condition. Such as pre-injection, discharge point, full load point conditions.
2. The CR-C Common Rail Injector Tester is an easy-to-operate tool that can be tested together with the injector hand pump. Small in size and light in weight, it can meet maintenance personnel's requirements for simple testing equipment.
▶Specifications:
1.Production model: CR-C common rail injector tester
2.Test range: atomization, ignition, discharge and full load conditions.
3.Injector test: bos-ch, Den-so, Del-phi common rail injectors.
4.Measuring range: 0 to 600 bar and 0 to 8000 PSI
5.Pressure range: 60 MPa (600 bar)
6.For 6190/6200/6170 diesel engine
7.Testable pressure: ≥35.0 MPa (350 bar)
8.Fuel tank capacity: 4000ml
9.Fuel cup: 0.8 liter
10.Pressure: 0-60MPa
11.Piston bore: 2/5''.
12.Adjustable width: 10 MS
13.Power supply: AC110v-240V
14.Working temperature: -30C°-70C°
15.Nozzle connection: M14X1.5-M14X1.5, M14X1.5-M12X1.25, M14X1.5-M12X1.5
16.Applicable models: Diesel engine vehicles
▶S60H Package:
1 x main unit
2 x fuel rods
1 set of accessories
1 x User Manual
▶CR-C packaging
1 x CR-C main unit
1 x Main Test Cable
1 x for Bos-ch connector
1 x for connector
1 x for Den-so connector
1 x for cable clamp connector
3 x fuses
1. The CR-C multifunctional common rail injector tester adopts the control chip imported from Germany, which can accurately and effectively simulate the ECU driving signals of the injector in each working condition. Such as pre-injection, discharge point, full load point conditions.
2. The CR-C Common Rail Injector Tester is an easy-to-operate tool that can be tested together with the injector hand pump. Small in size and light in weight, it can meet maintenance personnel's requirements for simple testing equipment.
▶Specifications:
1.Production model: CR-C common rail injector tester
2.Test range: atomization, ignition, discharge and full load conditions.
3.Injector test: bos-ch, Den-so, Del-phi common rail injectors.
4.Measuring range: 0 to 600 bar and 0 to 8000 PSI
5.Pressure range: 60 MPa (600 bar)
6.For 6190/6200/6170 diesel engine
7.Testable pressure: ≥35.0 MPa (350 bar)
8.Fuel tank capacity: 4000ml
9.Fuel cup: 0.8 liter
10.Pressure: 0-60MPa
11.Piston bore: 2/5''.
12.Adjustable width: 10 MS
13.Power supply: AC110v-240V
14.Working temperature: -30C°-70C°
15.Nozzle connection: M14X1.5-M14X1.5, M14X1.5-M12X1.25, M14X1.5-M12X1.5
16.Applicable models: Diesel engine vehicles
▶S60H Package:
1 x main unit
2 x fuel rods
1 set of accessories
1 x User Manual
▶CR-C packaging
1 x CR-C main unit
1 x Main Test Cable
1 x for Bos-ch connector
1 x for connector
1 x for Den-so connector
1 x for cable clamp connector
3 x fuses