𝐍𝐎𝐓𝐄: These seat covers are make and model specific. They are not a universal fit. Please read below information carefully before ordering. If you are uncertain about your cart model, please message us and let us assist you to order the right one. 𝐀𝐩𝐩𝐥𝐢𝐜𝐚𝐭𝐢𝐨𝐧: These Black Blue Golf Cart Seat covers will only fit Front & Rear Seats of Yamaha Drive G29 2007-2016 and 2017+ Drive 2 gas & electric golf carts. They will NOT work on other makes or models. They do NOT fit two split lean backs. They ONLY work on factory seats. If you have executive seats, modified seats or aftermarket seats, these covers will not fit. 𝐁𝐞𝐧𝐞𝐟𝐢𝐭𝐬: Replace your Worn and Torn old seat cover with Huskey's golf cart seat cover to give your cart a complete new and upgraded look. 𝐅𝐞𝐚𝐭𝐮𝐫𝐞𝐬: These seat covers have 1/2 𝒊𝒏𝒄𝒉 𝒕𝒉𝒊𝒄𝒌 extra foam padding to give you a more CUSHIONED ride. In addition, our insert panels are stitched providing a higher quality look and feel. We use piping on exterior panels, giving your cart a luxurious look. We use high quality 𝒎𝒂𝒓𝒊𝒏𝒆 𝒈𝒓𝒂𝒅𝒆 𝒗𝒊𝒏𝒚𝒍 treated with UV inhibitors which ensures our seat covers will not fade over time. The material we use is also guaranteed not to crack in cold weather. 𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧𝐬: Huskey golf cart seat covers are designed to be stapled over the original seats. We include step by step installation instructions in the package. Please check with us before purchasing. The Rear Seat lean back sizes need to be 35” x 12” and the rear seat bottom sizes need to be 37.5” x 14”. Otherwise, they may not fit. 1x Front Lean Back Cover (Will not fit two pieces? seat back) ?1x Front Seat Bottom Cover ?1x Rear Seat Lean Back Cover (will fit most rear seats in the market) Approx. Seat Back size: 35"x12" ?1x Rear Seat Bottom Cover (will fit most seats in the market) Approx. Seat Bottom Size: 37.5"x14"; Golf cart seat cushions take a lot of abuse, as passengers continually get in and out of your golf cart. Cracks and tears may begin to occur with extended use and that is the perfect time to change your seat covers. STAPLE -ON SEAT COVER SET 1. Remove the seat from the cart. 2. Remove arms and hinges. 3. Center new seat cover over old, pulling corners evenly. 4. Snug up seat cover and temporarily tack or staple into place. 5. Check Compatible with proper fit beCompatible withe proceeding, making adjustments as necessary. 6. Staple permanently. 1. Remove back cap if it has one. Center new seat cover over old, pulling corners evenly. 2. With the back cover properly fitted, temporarily staple along the bottom of back rest. 3. Some models have a dip in the top of the backrest, so you will need to make relief cuts in the fabric. (Be careful not to cut too deep) 4. Pull fabric until it conCompatible withms to this dipped area and staple into place. More cuts may be needed. Be careful not to rip the fabric at buts when pulling. 5. Staple permanently. BE SURE TO STAPLE ALL SEAMS BECompatible withE TRIMMING DO NOT USE BLEACH