Compatible Printer: The PEI build plate is for Kobra 3 Max Combo. Excellent Adhesion With Double-sided spraying PEI spring steel plate, it has strong adhesion to adhere the model in a better way. You can use either side. Special Material: made of Polyethylene which is inherently flame resistant and low in smoke production, high strength and heat resistance. Excellent Flatness: It provides the most flat build surface in the market, ensuring high flatness for the bottom of print, to make sure the model can be firmly attached to the surface of the print platform. It's easy to remove the prints when the PEI sheet 430x430 cools down to around 40°C. If it's stuck, please gently bend the build plate to pop it off. HzdaDeve 430X430MM for Kobra 3 Max Combo Double Sided H1H PEO Build Plate PEI Sheet Heated Bed Spring Steel Flexible Platform for Anycubic Printer (PEO+Debris)

Product Specification:
Material: PEI+steel plate
Size: 430X430MM
Double-sided bed: Both sides of the spring steel build plate can be used.
Compatible with Anycubic Kobra 3 Max Combo

Note:
1. Due to the thickness of the sticker, please adjust the height of your Z axis.
2. When it get dirty on the surface, please just wipe down with isopropyl alcohol between prints for best results.
3. Light sanding with 600-1000 grit sand paper can be done after lots of printing to give the PEI sheet more life.
4. Note: PEI can bear high temperature, but over 130 degree would weaken the magnet of the magnetic base.

Package includes: 1 kit 430x430mm pei bed surface.