【Double Sided Textured PEO+PEI Build Plate】The spring steel bed plate is come with 2 printing textures. One side is PEO surface which can print excellent mosaic pattern. Other side is textured PEI which can print frosted models. 【Excellent Adhesive for First Printing Layer】When the temperature of the heated bed is about 60℃, you can achieve good adhesion without tape or glue. 【Easily To Remove The Models】The PEO PEI print bed offer more flexiblility and high flatness. When the heated bed temperature drops to normal temperature, the models on the flexible PEO+PEI build plate will come off easily. But if the model is still stucking on the plate, gently bending the print plate and removing it. 【Support Various Filaments】For PEO build plate we suggest PLA, TPU, PETG. (The corresponding temperature PLA/TPU: 50-70℃; PETG: 70-80℃. PEI surface can prints PLA, PETG, ABS, TPU, ASA, PVA, PET, PA, PC etc.(The recommend temperature of PEI side is PLA/TPU: 50-60℃; PETG: 70-80℃; ABS: 80-100℃. If printing high-temperature filaments such as ABS, it is recommended to use the enclosure for printing or apply glue on the hot bed to assist with adhesion. 【Compatible 3D Printers】Our double-sided textured PEO+PEI build plate fit 3D printers with a platform size of 257x257, for Bambu Labs X1C/X1/P1P/P1S/P2S/A1. IdeaFormer-3D PEO+PEI Build Plate for Bambu Lab X1C/X1/P1P/P1S/P2S/A1, 257x257mm Double Sided PEO+PEI Spring Steel Bed Plate Flexible Textured Print Bed for Bambulab 3D Printers