Double Sides Selection: one side has a hexagonal pattern, diverse textures, emitting a different light, the other side has a check pattern, the bottom of the model will show vivid colors. pattern, the bottom of the model will show vivid colors. adding more interesting inspirations to your creations and immersing you in the fun of 3D printing project No sticker for sticking, size: 235×235mm/9.25×9.25inch. Suitable for K1C/K1/ Ender-3 S1/Ender-3 S1 Pro /Ender-5 S1/Ender-3 V3/Ender-3 V3 KE/Ender-3 V3 SE and other Ender 3 series 3D printers Please confirm your 3D printer hotbed size before ordering Excellent adhesion for first layer. It is different from H1H - PEI - PEO/PET/PEY printing heatbed surface, we recommend to use with glue stick for better adhesion. Simply bend the steel plate gently to remove the printing model. Please let the build plate cool down before remove the model Print bed surface can withstand high temperature, for 1.75mm filaments, such as PLA /PETG /ABS, If you want to print other filaments, please adjust the parameters Easy to maintain,you only need wipe the k1c build plate surface with a wet tissue and then wipe dry it with a dry tissue to keep it clean. It will become as clean as the first time you got it the texture can be reappeared Package Includes:
1Pcs k1 235mm double sides coating removable steel plate
We recommend filament use temperature:
PLA: Heat bed temperature60-65℃ / 140-149℉ and 220-230 ℃ / 428-446 ℉ in the nozzle.
PETG: Heat bed temperature 70-90℃ / 158-194℉, nozzle temperature 240-250 ℃ / 464-482 ℉.
ABS: Hot bed temperature 90-100℃/194-212℉, nozzle temperature 250-270 ℃/482-518 ℉.
Easy to Remove and use and install.
The levelling nozzle should not be set too low, because if the nozzle cuts into the platform, it may cause permanent damage, or if the first layer is too low, it may cause strong adhesion, resulting in the pick-up die tearing off the top layer.
Steel plates are consumables with a certain service life that can be extended if used correctly. Please use them in accordance with the above requirement
1Pcs k1 235mm double sides coating removable steel plate
We recommend filament use temperature:
PLA: Heat bed temperature60-65℃ / 140-149℉ and 220-230 ℃ / 428-446 ℉ in the nozzle.
PETG: Heat bed temperature 70-90℃ / 158-194℉, nozzle temperature 240-250 ℃ / 464-482 ℉.
ABS: Hot bed temperature 90-100℃/194-212℉, nozzle temperature 250-270 ℃/482-518 ℉.
Easy to Remove and use and install.
The levelling nozzle should not be set too low, because if the nozzle cuts into the platform, it may cause permanent damage, or if the first layer is too low, it may cause strong adhesion, resulting in the pick-up die tearing off the top layer.
Steel plates are consumables with a certain service life that can be extended if used correctly. Please use them in accordance with the above requirement