RECOMMENDED FOR most applications on street driven & high performance general purpose applications USE WITH stock OEM coil or JEGS HP coil part number 555-40105, JEGS ignition control unit part numbers 555-40800 & 555-40805, Mopar orange ignition control unit part number 312-P4120505, chrome part number 312-P4120534, and gold part number 312-P4120600 COMPATIBLE WITH most Mopar OEM (oil filled) or OEM-Spec coils NOTE: Ballast Resistors with less than 0.5 OhmS are only recommended for racing applications that run high RPM & are not recommended for vehicles that idle for extended periods of time (i.e. 15-20 minutes) since this will overheat the ignition coil due to the longer dwell time at idle MUST HAVE ITEM when replacing or upgrading your ignition system components Ballast Resistor1 Ohm
Use with:Stock OEM Coil or HP Coil 555-40105Ignition Control Units 555-40800 & 555-40805Mopar Orange 312-P4120505, Chrome 312-P4120534, and Gold 312-P4120600 Ignition Control Units 1.0 Ohm Ballast Resistor is recommended for most applications on street driven & high performance general purpose applications. This ballast resistor is recommended with most Mopar OEM (oil filled) or OEM-Spec coils. This ballast resistor is also recommended for use with HP Coil 555-40105. Note: Ballast Resistors with less than 0.5 Ohm are only recommended for racing applications that run high RPM only & are not recommended for vehicles that idle for extended periods of time (i.e. 15-20 minutes) since this will overheat the ignition coil due to the longer dwell time at idle.