The PCB is customized and fixed according to the high voltage package, which is convenient to use. Products include ZVS high voltage power supply and Jacobs ladder. ZVS high voltage power supply is a welded product, and Jacobs ladder is a kit, which needs to be assembled by ourselves. The horn electrode is fixed on the base plate with insulator, and the base plate will never be damaged by the hot copper wire. This kit does not include power supply. You need to purchase switching power supply of more than 24 V and 150 W for power supply. 1. Install four screws as fixed feet
2. Install the red insulator
3. Pull out the copper core in the wire and bend it
4. Fix the copper wire on the screw of the insulator. The copper wire must be straightened or the arc will not rise.
5. The three wires of the high-voltage package are connected to the output end of the circuit board in order and tighten the three screw lizards
6. The positive electrode (thick red wire) and the negative electrode (thin black wire) of the high-voltage package are respectively connected to the screws fixing the copper wires. The circuit board inputs 24V DC, the left side is negative, the right side is positive