Power monitoring Smart Plug with 15 amp relay. Runs ESPHome out of the box for 100% local control without flashing, soldering, editing YAML, or hoping tuya-convert works. Connects natively to Home Assistant without going through a cloud connection or requiring a third-party App to setup or connect the plug. ESPHome HTTP API allows use without Home Assistant. Reprogrammable with any ESP8266 compatible firmware. Easily integrates into any existing MQTT system. Compatible with Tasmota. Firmware version 1.91 adds independent configuration for use of red and blue LEDs, as well as allowing for dimming of both. Firmware version 2.02 improves power monitoring accuracy. Same KAUF firmware you know and love with new and improved hardware. This classic home automation device can be used to switch on and off a device that plugs into a standard U.S. 120-volt wall outlet. Common usages include lamps, box fans, and Christmas lights. Power monitoring lets you know how much power the plugged in device is using, as well as whether the plugged in device is running and when it finishes. A binary sensor is automatically created that lets you know if the plugged in device is running using a configurable wattage threshold. The recommended Tasmota template is {"NAME":"Kauf Plug","GPIO":[0,320,0,32,2720,2656,0,0,321,224,2624,0,0,0],"FLAG":0,"BASE":18}. IMPORTANT NOTE: Do not have anything plugged into the KAUF Smart Plug when Tasmota is first flashed.