Extreme Salt-Water Durability – Powder-coated, marine-grade aluminum one-piece top plate + 1.5" C-ball and 316 stainless hardware survive 1,000 + hr salt-spray tests, so your fish-finder mount stays corrosion-free on ocean, bay, or brackish trips. Heavy-Duty, Wave-Proof Stability – Reinforced aluminum/composite arm supports 15.5 lb static / 4 lb underway, locking large depth-finder screens in place when your boat slams through chop—ideal for Garmin, Lowrance, and Humminbird units. C-Size 1.5" Ball & 5.9" Arm — Infinite Adjust – Smooth ball-and-socket delivers 360° rotation
90° tilt for glare-free viewing. Swaps straight into RAM Mounts, Arkon, iBolt and any C-ball marine electronic mounting system. Two‑Way Installation: Drill‑Down or Track Rail – Bolt to dash, gunwale, or kayak deck, or use the included T‑bolt track‑rail ball on YakAttack, RAM Tough‑Track & other gear tracks up to 4 mm thick. Rails thicker than 4 mm can clamp securely but may not slide along the track. Four sets of 316 stainless screws, lock nuts, and sheet‑metal fasteners come in the box. Direct‑Fit for Top Fish Finders – Universal plate pattern matches Garmin GPSMAP / ECHOMAP / STRIKER, Lowrance HDS / Elite FS / Hook Reveal, Humminbird HELIX 7–12 / SOLIX / APEX—and any fish‑ or depth‑finder that accepts a 1.5‑inch ball, giving you one mount for every boat. Humminbird HELIX 5 requires drilling extra holes or using an adapter (not included). SOLID ONE-PIECE ALUMINUM TOP PLATE & BALL
The display plate and 1.5-inch C-ball are CNC-milled from a single billet of marine-grade aluminum, then powder-coated and salt-spray tested for 1,000 + hours. The center arm uses high-strength, salt-resistant composite to shed weight while keeping rock-solid rigidity.
ROCK-SOLID SUPPORT FOR BIG SCREENS
Holds 15.5 lb at rest and 4 lb while you’re under way—plenty for today’s 12–16″ fish-finder and chart-plotter displays. Your electronics stay locked tight when the hull slams through chop.
C-SIZE 1.5 IN BALL 5.9 IN ARM
Precision ball-and-socket geometry delivers 360° pan and 90° tilt for a glare-free view anywhere on deck. Fully compatible with RAM, Arkon, and iBolt mounting ecosystems.
T-BOLT TRACK-RAIL MOUNT INCLUDED
Swap bases in seconds. The supplied T-bolt ball clamps securely to YakAttack, RAM Tough-Track, and most ½-inch gear tracks up to 4 mm thick—no extra parts needed.
DRILL-DOWN OR TRACK-MOUNT ANYWHERE
Dash, gunwale, kayak deck, or gear track—install it where you need it. Four sets of 316 stainless screws, lock nuts, and sheet-metal fasteners are in the box for a factory-clean install that lasts for years.
UNIVERSAL ELECTRONICS COMPATIBILITY
Direct-fit hole patterns for Garmin GPSMAP, ECHOMAP, STRIKER; Lowrance HDS, Elite FS, Hook Reveal; Humminbird HELIX, SOLIX, APEX, and any unit that accepts a 1.5-inch ball.
WHAT’S IN THE BOX
See the included dimension diagram (6.23″ overall height, AMPS/VESA & Lowrance 4-hole pattern) to confirm a perfect fit before drilling.
90° tilt for glare-free viewing. Swaps straight into RAM Mounts, Arkon, iBolt and any C-ball marine electronic mounting system. Two‑Way Installation: Drill‑Down or Track Rail – Bolt to dash, gunwale, or kayak deck, or use the included T‑bolt track‑rail ball on YakAttack, RAM Tough‑Track & other gear tracks up to 4 mm thick. Rails thicker than 4 mm can clamp securely but may not slide along the track. Four sets of 316 stainless screws, lock nuts, and sheet‑metal fasteners come in the box. Direct‑Fit for Top Fish Finders – Universal plate pattern matches Garmin GPSMAP / ECHOMAP / STRIKER, Lowrance HDS / Elite FS / Hook Reveal, Humminbird HELIX 7–12 / SOLIX / APEX—and any fish‑ or depth‑finder that accepts a 1.5‑inch ball, giving you one mount for every boat. Humminbird HELIX 5 requires drilling extra holes or using an adapter (not included). SOLID ONE-PIECE ALUMINUM TOP PLATE & BALL
The display plate and 1.5-inch C-ball are CNC-milled from a single billet of marine-grade aluminum, then powder-coated and salt-spray tested for 1,000 + hours. The center arm uses high-strength, salt-resistant composite to shed weight while keeping rock-solid rigidity.
ROCK-SOLID SUPPORT FOR BIG SCREENS
Holds 15.5 lb at rest and 4 lb while you’re under way—plenty for today’s 12–16″ fish-finder and chart-plotter displays. Your electronics stay locked tight when the hull slams through chop.
C-SIZE 1.5 IN BALL 5.9 IN ARM
Precision ball-and-socket geometry delivers 360° pan and 90° tilt for a glare-free view anywhere on deck. Fully compatible with RAM, Arkon, and iBolt mounting ecosystems.
T-BOLT TRACK-RAIL MOUNT INCLUDED
Swap bases in seconds. The supplied T-bolt ball clamps securely to YakAttack, RAM Tough-Track, and most ½-inch gear tracks up to 4 mm thick—no extra parts needed.
DRILL-DOWN OR TRACK-MOUNT ANYWHERE
Dash, gunwale, kayak deck, or gear track—install it where you need it. Four sets of 316 stainless screws, lock nuts, and sheet-metal fasteners are in the box for a factory-clean install that lasts for years.
UNIVERSAL ELECTRONICS COMPATIBILITY
Direct-fit hole patterns for Garmin GPSMAP, ECHOMAP, STRIKER; Lowrance HDS, Elite FS, Hook Reveal; Humminbird HELIX, SOLIX, APEX, and any unit that accepts a 1.5-inch ball.
WHAT’S IN THE BOX
- Fish-Finder Mount (aluminum plate & ball, composite arm)
- T-bolt track-rail ball (fits ≤ 4 mm rails)
- Four sets of 316 stainless hardware
- Quick-start guide
See the included dimension diagram (6.23″ overall height, AMPS/VESA & Lowrance 4-hole pattern) to confirm a perfect fit before drilling.