Applicable Models:
HX6300 Series: HX6310/HX6320/HX6340
HX6500 Series: HX6511/HX6530
HX6700 Series: HX6710/HX6720/HX6730/HX6750/HX6760
HX6900 Series: HX6910/HX6920/HX6930/HX6950/HX6960/HX6970/HX6980
HX8900 Series: HX8910/HX8920/HX8911/HX8962
HX9100 Series: HX9112/HX9120/HX9140/HX9141/HX9150/HX9160/HX9172/HX9182/HX9192
HX9300 Series: HX9340/HX9350/HX9360/HX9370/HX938B/HX939P/HX939B/HX939V/HX939W
HX9900 Series: HX992x/HX993x/HX9957/HX9957/HX9903/HX9924/HX9954/HX9984
HX number is marked on the bottom of your toothbrush handle. If your handle shows numbers as HX9120/02, they belongs to HX9100 series
What You Get:
1 x Rechargeable battery replacement for Sonicare parts
1 x Tin wire
1 x Shaft rubber seal
1 x Set of Disassemble Tools(1 x Custom-made Spudger + 2 xTriangle Pick Openers)
Capacity:800 mAh (The most accurate capacity, higher or lower capacity will damage the toothbrush)
Voltage: 3.7 V
Tab length: 0.59 IN(When soldering the HX6300 HX6500 HX6700 HX6900 HX9300 series, if the board contacts are too short, after soldering we should cut off the excess parts)
If your toothbrush is not responding and not charging at all, it means that the PCB or motor of the toothbrush is damaged and replacing the batteries will not help. This is due to the deterioration of the rubber seal which allows water to seep into the handle and further damage the internal structure.(We recommend that you replace the rubber seal every 3 months)
No ratings. Be the first to rate
customer ratings
Share your thoughts with other customers