FALL PROTECTION COMBO - The KwikSafety THUNDER Fall Protection Combo is the ultimate bang for your buck, high value PPE products all bundled into one! Each Combo comes with a: 3 D-Ring THUNDER full body harness, 6’ RATTLER Safety Lanyard, A 10 lb TENTACLE Tool Lanyard! Truly the perfect Construction / Roofing / Roofer tool combo for a great value. MEETS ANSI Z359.11-2021 STANDARDS - The THUNDER safety harness meets industry-standard ANSI/ASSE Z359.11-2021 compliance. KwikSafety gets all their products third-party-inspected. Working at heights 6 ft or more? Equip yourself with the proper fall arrest system. View the Compliance Label/ Safety Label for more information. SAFETY HARNESS - The KwikSafety THUNDER Full Body 3D Ring Safety Harness supports users within the capacity range of 130 to 310 pounds (59 to 140 kg) due to the multiple adjustment points located on the harness. To ensure proper fit, ensure that all pass-through connectors are connected and aligned, leg and shoulder straps are snug, and chest straps are in the center of the chest area. SAFETY LANYARD - The internal shock-absorbing lanyard makes the RATTLER a more lightweight fall protection device. The dual-action, double-locking snap hooks prevent accidental rollout while remaining easy to latch on to your anchor point. Tensile strength (max load) for the snap hook is rated at 5,000 pounds with a gate strength of 3,600 pounds. Meets ANSI Z359.12 standards, performs in wet, dry, hot, or cold weather, has high tensile strength, plus top quality static & dynamic performance. TOOL LANYARD - The TENTACLE tool lanyard is designed for light duty uses, namely hand tools and smaller power tools. The lanyard has a durable bungee strap with a cord stopper with a durable rubber base to secure tools. The anodized aluminum carabiner (does not rust!) is an easy quick snap clip. The Tentacle is third party tested to a max capacity of 20 lbs, resting length is 3ft and activated length is about 5 ft. KwikSafety is an ANSI Tested and OSHA compliant brand. Unfortunately, in the fall protection industry it is "BUYERS BEWARE". Competitors may not meet industry safety standards and patrons should research their brands before purchasing. KwikSafety Fall Protection Safety Harnesses (Universal Arnes de seguridad) are for any professional industry. It has 1 ¾ -inches wide yellow load bearing straps and black lock stitched webbing to keep you safe and secure while working and if a fall were to occur. Our bright yellow load bearing straps are visible in various weather conditions: direct sunlight, foggy, dusty and dim-light. Easily connect the front, side, and back straps with a pass-through buckle. A Single (1) metal Dorsal Ring is located on the back of the Full Body Harness (arneses para construcción, arnes para roofing) and is used as the primary fall arrester attachment. D-rings located on the hips of a safety harness (arnes seguridad) are for work positioning uses ONLY. Hip rings are NOT used for fall protection but for maneuverability in job types including arborists, utility workers climbing poles, construction workers tying rebar or operating in a suspended lift or boom. Water repellent safety webbing ergonomically supports back and hips, making the harness comfortable while bearing the weight of the user as well as the weight of tools that may be attached. Our harness protection is available in a pack combo or kit. Our KwikSafety Full Body Harness is One Size Fits Most and fits a men's and women's height range of 4’10” to 6’6”; and a weight range of 130 lbs. to 310lbs. Here at KwikSafety craftsmanship is taken with a critical eye when we consider workers safety. Our KwikSafety D Ring Safety Harness exceeds all applicable standards including OSHA and ANSI and is Government Approved, DOD Approved, Airport & Port Approved, and RapidGate and TWIC Approved. Great for use at Ports, Airports, Highways, Military Installations and Other Government Facilities.