LINK MORE, WIRE LESS — Link multiple Halo Series fixtures to a single power source; this 12 inch link cable bridges gaps around corners and across cabinet runs for flexible layouts. HALO SERIES ONLY — Accessory linking cord for Lagom Halo under‑cabinet fixtures. Not a power cord. Not compatible with other series or brands (including Getinlight and Inlight). LOW‑PROFILE, CLEAN INSTALL — Flat profile tucks out of sight and routes neatly through cabinet seams and tight spaces. SECURE CLICK‑LOCK — Keyed connectors with latch ensure correct orientation and a secure fit—push until you hear/feel the click. SCALES UP TO 15 FIXTURES — Combine link cables to build runs of up to 15 fixtures on one power feed (see fixture power specs).

Expand your Lagom Halo under‑cabinet lighting with this 12‑inch linking cord.
It connects one powered Halo fixture to the next, carrying power around corners and across cabinet runs so you can add light exactly where it’s needed—while keeping a single power feed.
The flat, low‑profile cable tucks out of sight, and keyed, click‑lock connectors ensure a secure, correct fit.

Installation instructions:

• Power OFF at the breaker. Mount the fixtures per the “Mounting Installation” section of the under‑cabinet lighting manual. The first fixture in the run may be corded or hardwired.
• Remove the screws and the plastic caps covering the power ports on the fixtures.
• Plug the linking cord into the “OUTPUT” port of the first fixture, then into the “INPUT” port of the next fixture.
• The linking cord has keyed, one‑way connectors at each end. If one end does not insert easily, try the other end. Do not force the plug into the port.
• Make sure both plugs are fully seated in their ports (flush with the housing); perform a light tug to confirm retention.
• For the end‑of‑run fixture, reinstall a plastic cap to cover any unused port.
• Restore power and test. Do not hot‑plug the linking cord.

Important information:

• Power OFF before linking; do not hot‑plug.
• Compatibility: For Lagom Halo Series fixtures only; Not a power cord. Not compatible with other series or brands (including Getinlight and Inlight).
• Capacity: Max 15 fixtures per power feed; exceeding the limit may cause dimming or flicker.
• Length: Cable length 12 in; choose the correct length for your layout.