【600L/H 5600RPM Water Cooling Systems】The water row made of aluminum material, equipped with standard G1/4threaded interface, easy to install, the adopts ceramic bearings, graphite bushing, rate up to 600L/H. This is a laptop water cooling kit, the product is special, easy to install. 【Efficiency and Low Noise】The laptop water cooling fan with fan design, the fan speed is 1200RPM, the heat dissipation efficiency is very high, the fan adopts sleeve bearings, and the noise is lower.Compared with the air-cooling heat dissipation, the cooling effect of the water-cooled package is more significant. 【Custom Liquid Cooling Stable Performance】Notebook custom liquid cooling can give you much better cooling performance compared to all inone cooling systems and traditional air coolers as you can make specific tweaks to your system to have it perform better. Clear water cooling tubes make it easy to show off your favorite water-cooling fluid, creating a cooler water cooling effect and providing a better immersive gaming experience. 【Complete Computer Water Cooling Set】The water cooling kit contains all the bits you need to customise your water cooling set up and have it match the rest of your system.You don’t need to buy other accessories yourself or consider compatibility issues, more practical. 【100% Satisfaction Guarantee】Professional manufacture, stable performance and high reliability.This laptop water cooling kit has a complete service,if you have any questions about the product or you are not satisfied, please us at any time, we will provide you with the best solution.Your satisfaction is our main concern. Specifications:
Water
Size: Approx. 12 * 5.8 * 5.8 cm/ 4.7 * 2.3 * 2.3 in
Material: PMMA + anode aluminum
Intermediate transparent acrylic outer diameter: 50mm
Hole position: G1/4 thread *6
Color: Red
Equipped with adjustable plastic clips*1

Package Iist:
1 * Water Row
1 *
2 * Fan
1 * Water (Equipped with adjustable plastic buckle * 1)
6 * Fast
7 * Screw Kit
1 * Water Meter
3 * Hard Tube
2 * Water Row Stent
5 * Choke Plug
2 * I-Type Holder
2 * 90 ° Elbow
2 * 90 ° Stents
2 * Connector

Installation Steps
1. Lock the two fans with the M3*32 screws on the water line.
2. Use the M3*35 screw to lock the water row bracket on the water line.
3. The other side of the second step uses the M3*12 screw to fix the water row bracket and the water drain.
4. Lock the 90° bracket with an M4*14 screw + M4 nut on an I-bracket.
5. Lock the type I bracket of step 4 with the M4*10 screw + M4 nut under the .
6. Lock the adjustable plastic buckle of the water with another M4*10 screw + M4 nut on the other type I bracket.
7. Lock the pump of step 5 and the adjustable plastic clip of step 6 with M3*12 screws on the water line.
8. Install the quick screw, pagoda, 90° elbow and plug on the water drain, and water respectively.
9. Install the quick-turn nut and seal ring on the short straight hard pipe and connect the and the water together.
10. Install one plug and two quick turns on the water meter. Quickly screw the nut and seal ring on the other two hard tubes and connect them with the , water meter and water drain to complete the installation.