The LiquaGen Water Saver Kit provides you with a precise and advanced membrane element that not only delivers an attractive cost to benefit ratio, but also gives you a kit that is consistently high quality and high octane performance for your Water Purifier! The deliberate matching of design increases the efficiency and effectiveness of the contaminant rejection of the membrane along with optimizing the amount of reject water necessary to clean the membrane during normal everyday use. IN THE BOX - LiquaGen 100 GPD membrane, 2 - 2.5" x 2.5" membrane clips, 2 - 1/8" x ¼" 90 degree elbows 1/8" x ¼", 90° check valve, RO membrane housing ¼", tube splitter, 4 Feet of Color coded Food Graded Tubing. TOP OF THE LINE: The membrane is top-quality, and equals or surpasses all of the performance specifications of other membranes of the same 200 GPD capacity. This membrane is tested ANSI Standard 58 for material requirement. LiquaGen Reverse Osmosis Membranes are made of the highest quality spiral-wound Polyamide and offer outstanding contaminant rejection at water pressures up to 125 psi. SPECIFICATIONS: Designed as an add on for RO systems. Water production increases approximately 3 gallons per hour to 6 depending on the water quality, outside temperature, and PSI. Excellent for areas with 65+ PSI water pressure. Produces water 2x faster than standard 200 GPD membranes & cuts the waste water by 50%. Replace at 3-year intervals or sooner if TDS levels increase beyond normal levels. APPLICATIONS: This water saver kit can be used in a variety of water filtration system applications, such as household water purification, laboratory, hydroponics, hospital, and many other applications where a reliable, performance membrane is needed. INCULDES A 100 GPD RO MEMBRANE