MPS-3010H-3C: 3-Channel adjustable dc power supply, rated output 0-30 V / 0-10 A, 0-30 V / 0-10 A, 5V / 3A, total power up to 615W. Voltage and current 4-digit bright screen display. CH1 and CH2 can be controlled independently. Input voltage 110V/220V switching. Size 9.8 x 5.9 x 13 inches, weight 26.4 lb High Precision and Stability: The set accuracy is 0.03% + 10 mV, 0.1% + 5 mA. 10 mV, 1 mA high resolution. 2 mVrms 5mArms low ripple. The power supply output voltage and current are stable and low noise. The power-on slow-start circuit is designed for low inrush current, ensuring stable and accurate DC output, minimizing interference, and protecting electronic devices Series parallel setting: The lab power supply can be switched between Indep, SERIES, and PARALLEL with one button, without manual reconnection of wires. Direct display current voltage values in series or parallel, intuitive and readable. In parallel mode, positive and negative voltages can be formed. The dc power supply can also preset current and voltage without short circuit Easy to use: MATRIX dc bench power supply says goodbye to the hassle of coarse and fine adjustments, the value changes 1 unit with each turn of the encoder knobs. Voltage and current upper and lower limit setting. The variable dc power supply also has features like OCP/OVP/OTP protection and an intelligent fan system. Buzzer sound can be turned off. One-click to restore factory settings Differences with MPS-3010H-3: MPS-3010H-3C dc power supply supports SENSE, USB, RS-232 and RS-485 interfaces, can be connected to a computer or automated device Applications: MATRIX linear power supply is designed for a wide range of applications such as laboratory, electronic repair, DIY projects, communication equipment maintenance, product assembly lines, scientific research, and educational institutions

MPS-3010H-3C triple channel dc linear power supply with RS-232/RS-485/USB, two adjustable channel and one fixed 5V 3A channel. The resolution is 10mV 1mA.

1. The current and voltage can be adjusted within a certain range.

2.The series-parallel mode directly displays the voltage and current.

3. The last output data and last output state can be saved.

4. Channel 1 and Channel 2 are independent switch control.

5. Four-digit display,10mV/1mA resolution.

Rated output

CH1,CH2: 0~30V, 0~10A(adjustable)

CH3: 5V/3A

Load regulation(CH1,CH2): ≤0.01%+8mV  ≤0.1%+5mA

Line regulation(CH1,CH2): ≤0.01%+8mV  ≤0.1%+5mA

Set/readback resolution: 10mV 1mA

Set/readback value accuracy

Voltage:≤0.03%+10mV

Current:≤0.1%+5mA

Paralle/Serial mode:

Power effect:≤0.01%+8mV

Load effect:≤0.01%+8mV

Ripple and noise: ≤2mV(rms) ≤5mA(rms)

Weight: 26.6lb