Fiberglassing, Impregnating Lay-Up Resin For Boat Building 1:1 Mix Ratio, Resistant, Room Temperature Cure Sealing And Waterproofing Of Wood, Concrete, For Boat Decks Excellent Adhesion To Wood, Steel, Aluminum, Soft Metals, Concrete, Ceramic, Fiberglass, Composites Low Shrinkage, Wide range of service temperature

MAX BOND LOW VISCOSITY MARINE GRADE Epoxy System is excellent for boat repairs, restoration and boat building.

MAX BOND LOW VISCOSITY MARINE GRADE is an Epoxy/Polyamide based resin, which is one of the best systems to use for applications that will be subject to water immersion and marine environments. It provides excellent resistance to saltwater, acidic and caustic exposure and retains its physical properties even after prolonged water immersion.

MAX BOND LOW VISCOSITY MARINE GRADE is a specially formulated to provide structural strength to a variety of marine and boat building use such as structural fiberglassing, waterproofing, and high strength bonding application.

MAX BOND LOW VISCOSITY MARINE GRADE is a low viscosity formulation of marine grade resin systems providing improved ease of use and faster fiberglass fabric wetting. Upon cure, marine polyurethane paints and other clear coatings are applied to its surface for UV protection from sunlight. 

PHYSICAL PROPERTIES TESTED @75°F

Mix Ratio:1:1 By Weight Or By volume
Mixed Viscosity: 1,950 cPs
Density: 1.10 g/cc
Mixed Color: Transparent Amber
Working Time: 30 Minutes 4-Oz Mass

CURED MECHANICAL PROPERTIES TESTED @75°F 

Cure Time: 24 Hrs. Min
Shore Hardness: 75D
Shrinkage: <0.5 %
Compressive Strength: 6500 PSI
Tensile Strength: 8700 PSI
Tensile Elongation: 3.4%