❉Full compatibility- This 23 blades PS5 fan compatible with Sony playstation 5 PS5 series fan 12047GA-12M-WB-01 12V 2.4A. The ps5 fan replacement can also give Playstation 5 console replace your faulty, cracked or broken Internal Cooling Fan. ❉Effective Cooling - Pressure-optimised 23 blade design with outstanding quietness of operation: high static pressure and strong CFM. MEASURED Air Flow 120 CFM, MEASURED Air Pressure 180 PA. Pushes a good amount of air, provides adequate ventilation, effectively lower PS5 temperature by 20c-30c, prevent the device from overheating, help to improve device performance and prolong the life of electronics. ❉Long lifespan, Durable - Impact resistance and Fireproof ABS material (compliance with UL 94), dual metal ball bearings, this fan has a lifespan of 10+ year. If PS5 Console internal cooler are broken or console has low frequency noise, you need to replace the new Internal cooling fan for Sony Playstation 5 PS5. The 23-blade fan is quieter than the 17-blade or 18-blade fan. ❉Low noise - Proper engineering balances noise with airflow. 2500rpm 3-pin PWM version with excellent balance of performance and quietness, supports automatic motherboard speed control (powerful airflow when required, virtually silent at idle). ❉Comes with professional tools help you to replace the ps5 internal cooling fan more convenient and easily. You will get: 1x Replacement Sony Playstation 5 PS5 23 Blades Fan, 1x T8 Screwdriver,1x Heatsink Paste. So you can replace the fan yourself without great expertise. ❉Compatible with PS5 Models CFI-10XX, CFI-11XX, and CFI-12XX series (Original/“Phat” version). Not compatible with PS5 Slim models (CFI-20XX series). To check your PS5 model, look for the CFI number on the label at the bottom or rear of your console. PS5 internal cooling fan, 12V 2.4A， 23 blades, 90mm wire length
RATED VOLTAGE : 12 VDC
OPERATION VOLTAaGE : 11.4 - 12.6 VDC
MINIMUN START DUTY : 17% @ 25kHz, 25℃, 3.3VDC
OPERATION DUTY RANGE : 10% - 100% @ 25kHz, 25℃, 3.3VDC
INPUT CURRENT : 1.60 (MAX. 1.90) A
RMS CURRENT AT DUTY CYCLE 10% : MAX. 0.06 A
RMS CURRENT AT DUTY CYCLE 17% : 0.08 (MAX. 0.12) A
RMS CURRENT AT DUTY CYCLE 100% : 1.90 (MAX. 2.15) A
PEAK CURRENT : 3.30 (MAX. 3.60) A
STANDBY CURRENT : MAX. 0.5 mA
INPUT POWER : 19.2 (MAX. 22.8) W
SPEED AT DUTY 10% : MAX. 750 R.P.M.
SPEED AT DUTY 17% : 750±300 R.P.M.
SPEED AT DUTY 100% : 2500 R.P.M.
MAX. AIR FLOW AT DUTY CYCLE 100% (AT ZERO STATIC PRESSURE): 3.405 (MIN. 2.826) M3/MIN. AT 12.0 VDC, 25℃
MAX. AIR PRESSURE AT DUTY CYCLE 100% (AT ZERO AIRFLOW) : 180.0 (MIN. 124.0) Pa AT 12.0 VDC, 25℃
MAX. AIR FLOW AT DUTY CYCLE 17%(AT ZERO STATIC PRESSURE) : 1.000 M3/MIN. (REF.) AT 12.0 VDC, 25℃
ACOUSTICAL NOISE AT DUTY CYCLE 17% (AVG. AT 0.25 METER): 42.0 (MAX. 50.0) dB-A AT 12.0 VDC, 25℃
ACOUSTICAL NOISE (AVG. AT 0.25 METER): 71.0 (MAX. 75.0) dB-A AT 12.0 VDC, 25℃
UNBALANCE : 300.8 mg-cm
INSULATION TYPE : UL: CLASS A
INSULATION STRENGTH : 10 MEG OHM MIN. AT 500 VDC (BETWEEN FRAME AND (+) TERMINAL)
DIELECTRIC STRENGTH : 5 mA MAX. AT 500 VAC 50/60 Hz ONE MINUTE, (BETWEEN FRAME AND (+) TERMINAL)
LIFE EXPECTANCE : 20,000 HOURS CONTINUOUS OPERATION
ROTATION : COUNTERCLOCKWISE DIRECTION FROM NAME PLATE SIDE