MEIRIYFA SP901E LED controller pixel strip amplifier is applicable to 5V-TTL signal dual signal. The single-line LED driver chip can support 8 channels of simultaneous output, while the dual signal is 4 channels used with the full-color controller. The output voltage is consistent with the input voltage. SP901E LED pixel strip amplifier is applicable to addressable LED bands with a single data line, such as WS2812B, WS2811, WS2813, WS2815, SK6812, SK6812-RGBW, SM16703, etc. The single-line LED driver chip can support 8 channels of simultaneous output and 4 channels of dual signals. The power supply of the sub-controller is DC5-24V, and the output voltage is consistent with the input voltage. The current through the sub-controller is limited. When the required current is too large, additional power supply is required to prevent the sub-controller from overheating damage due to too large current. Through the signal extender, one controller can control 4 light strips at the same time. The extender can be connected to control 8 light strips by one controller. Multiple signal amplifiers can be cascaded together synchronously, which is especially suitable for small and medium-sized dreamy color lighting projects. Good heat dissipation conditions will prolong the service life of LED pixel bar amplifier. High hardness shell, flame retardant material, high temperature resistance, anti-collision. Product Name:
MEIRIYFA SP901E led pixel strip amplifier.
Scope of Application:
It is suitable for the addressable LED tape with a single data cable, such as WS2812B, WS2811, WS2813, WS2815, SK6812, SK6812-RGBW, SM16703, etc.
Product Characteristics:
- Applies to 5V-TTL signal dual-signal and supports common IC models in the market.
- Single-wire LED driver chip supports 8 simultaneous outputs.
- Dual signal for 4 way and full color controller together.
- One switch can simultaneously control multiple light belts.
- Flame-retardant iron housing, high temperature resistance, anti-collision.
Parameter:
Operating voltage: DC5V to 24V.
Operating temperature: -25-85℃.
Working current: 3MA-6MA.
Output: 8 channels /4 channels.
Color: Black.
Size: 14*7*2.2CM
Note:
Please check whether the output voltage of the LED power supply meets the requirements of the product voltage range.
The diameter of the wire used must be enough to load the connected LED lamps, and ensure that the wiring is firm, so as to avoid overheating or poor contact of the wire triggering accidents.
Before power-on commissioning, ensure that all wiring is correct to avoid damage caused by wiring errors.
The package includes:
1*SP901E LED pixel strip amplifier.
MEIRIYFA SP901E led pixel strip amplifier.
Scope of Application:
It is suitable for the addressable LED tape with a single data cable, such as WS2812B, WS2811, WS2813, WS2815, SK6812, SK6812-RGBW, SM16703, etc.
Product Characteristics:
- Applies to 5V-TTL signal dual-signal and supports common IC models in the market.
- Single-wire LED driver chip supports 8 simultaneous outputs.
- Dual signal for 4 way and full color controller together.
- One switch can simultaneously control multiple light belts.
- Flame-retardant iron housing, high temperature resistance, anti-collision.
Parameter:
Operating voltage: DC5V to 24V.
Operating temperature: -25-85℃.
Working current: 3MA-6MA.
Output: 8 channels /4 channels.
Color: Black.
Size: 14*7*2.2CM
Note:
Please check whether the output voltage of the LED power supply meets the requirements of the product voltage range.
The diameter of the wire used must be enough to load the connected LED lamps, and ensure that the wiring is firm, so as to avoid overheating or poor contact of the wire triggering accidents.
Before power-on commissioning, ensure that all wiring is correct to avoid damage caused by wiring errors.
The package includes:
1*SP901E LED pixel strip amplifier.