Suitable for Coleman Roadtrip LEX Type Grill- This conversion fitting only fit for Coleman Roadtrip LXE griddle Roadtrip Grill Series 9949 / 9949A and Some 9941， C001, 5010000743, 9942A5251 Easy connect- After remove the regulator on your Coleman Roadtrip LXE then connect the female side to the connector on grill,other side easily hook 3/8" female flare end extension hose which connect your RV Durable material-- Made of 100% solid brass with Knurled handle easy connect and no tools needed Low pressure application-- This adapter can only connect a standard 3/8" female flare end extension hose on RV,you cannot connect it with the quick connect directly. Don't mix with Blackstone grill adapter-- This adapter is not suitable for Blackstone grill. Installation Points
1.Preparation:
◦Ensure that both the grill and the adapter are clean and free of any debris, dirt, or oil. This will help to ensure a proper seal and connection.
◦Make sure you have the appropriate tools, such as a wrench, to tighten the connections.
1.Installation Steps:
◦Align the male flare of the adapter with the connection port on the Coleman ROADTRIP series grill. The threads should be properly aligned.
◦Slowly start to screw the adapter onto the grill's connection port. Use a wrench to tighten the connection, but do not overtighten as this may damage the threads or the adapter.
◦After the adapter is securely attached to the grill, connect the RV propane extension hose to the other end of the adapter in the same way, ensuring a proper alignment of threads and a tight connection.
1.Final Check:
◦Once the installation is complete, visually inspect the connections to make sure there are no gaps or misalignments.
◦Before using the grill, perform a leak test. You can use a soapy water solution and apply it to the connections. If there are any bubbles forming, it indicates a leak, and you need to tighten the connections further or re - install the adapter.
1.Preparation:
◦Ensure that both the grill and the adapter are clean and free of any debris, dirt, or oil. This will help to ensure a proper seal and connection.
◦Make sure you have the appropriate tools, such as a wrench, to tighten the connections.
1.Installation Steps:
◦Align the male flare of the adapter with the connection port on the Coleman ROADTRIP series grill. The threads should be properly aligned.
◦Slowly start to screw the adapter onto the grill's connection port. Use a wrench to tighten the connection, but do not overtighten as this may damage the threads or the adapter.
◦After the adapter is securely attached to the grill, connect the RV propane extension hose to the other end of the adapter in the same way, ensuring a proper alignment of threads and a tight connection.
1.Final Check:
◦Once the installation is complete, visually inspect the connections to make sure there are no gaps or misalignments.
◦Before using the grill, perform a leak test. You can use a soapy water solution and apply it to the connections. If there are any bubbles forming, it indicates a leak, and you need to tighten the connections further or re - install the adapter.