Dash cam OBD2 power cable ideal for dash cameras, GPS, radar, and dash cams on the market. Just plugs into your car stock OBD or OBD2 port directly. Note: This unit DOES NOT work with EV Car/Electric Vehicle Two working mode: 24h Parking / ACC Mode Switch. Mode1: In this "MODE -", 24H parking monitoring, continue to power supply after the car is turned off, until the car battery is lower than 11.6V, the OBD line will automatically stop power supply after a delay of 5 minutes Mode2: Press the red button switch to “MODE O” --The car ignites and starts the power supply, and the OBD line automatically stops the power supply after the car is turned off and delayed for 20 minutes, turn off the output Low voltage protection: OBD2 dash cam power cable built-in intelligent control chip, which can detect the battery power of the car in real time. When the battery voltage drops to the low voltage protection value 11.6V, the power output automatically enters the low voltage protection and turns off the output , thus preventing it from draining the battery Common compatibility: OBD2 to mini USB OBDII Adapter Hardwire Charger Cable ideal for dash cam GPS navigator, DVR, radar detector and more Mini USB port devices. It is MINI USB OBD power, please note it! MISYNLON OBD Power Cable Adapter for Dash Cam
Input:OBD PROT, Output:MINI USB PORT
Input:DC 12V-24V, Output:DC 5V/3A
Works for all Mini USB port electronic devices
Plugs into your car stock OBD or OBD2 port directly, only obtain power from the ODB interface.
Dual working mode:
Mode "O": 24 Hours Surveillance,
ACC mode: Power off after 5 minutes when your car ACC is off.
Low voltage protection: It will automatically shut off the power to your dash cam when the battery voltage drops to 11.6V or 23.2V, thus preventing it from draining the battery.
Cable length:3.5meter(11.5 ft): Meet your wiring requirements
Note: If the working mode is not switching properly in some vehicels, please unplug and try it again.