【Superior Adaptability】MKP-32 trolling motor propeller is Compatible with Minn Kota models 3-5/8" motor diameter. Fits for All Terrain 46,47,50,55,65,70, Camo 55XL, Edge 50,55,70, Endura 46,50,55, Endura C2 50,55, Endura Max 50,55, Endura Pro 46,55, Engine Mount 55, Maxxum 55,65,70, Maxxum Transom 50,55,70, Pontoon Hand Control 55,70, Pontoon PowerDrive V2 54,68, PowerDrive V2 50,55,65,70, Riptide 50,55,65,70, Riptide Edge/Maxxum/PowerDrive 55,70, Riptide Terrova/Terrova 55, Traxxis 46,50,55,70, Vector/Vector 3X 46,55,70. 【If Not sure: Measure motor housing diameter: 3-5/8" = Compatible, or check the serial number: prefix “WWAF” through “WWAI” or “J” through “V”= Compatible】 【Kindly Note】NOT Compatible with Standard Minn Kota 45lb models with 3-1/4" diameter, e.g: Edge 45, PowerDrive 45, Endura Max 45. Factory-recommended propeller for these models: MKP-2. 【Excellent Design】This trolling motor prop is replacement for Minn Kota Trolling Motor 3-5/8" MKP-32 Weedless Wedge 2 Prop, for 55lb 60lb 68lb 88lb Outboard 12V 24V Motors, with OE part number 48-19640A40, Fits for All serial number prefixes from “WWAF” to “WWAI” or “J” to “V.” (Note: For 46-50lb Models: Compatible only if serial number prefix is "WW" or "J-O". For 55-70lb Models: Universally compatible with eligible serial number prefixes) 【High Quality Materials】The Trolling motor propeller is used with high-quality plastic, with high strength and anti-corrosion. It can withstand harsh marine environments, and will not get stuck with weeds or other underwater obstacles, and is featured with swept-back and flared blades to wedge weeds away, improve speed and efficiency. 【Easy to Install】Disconnect the motor and remove the prop nut and washer, turn the old prop to horizontal and pull it straight off, align new propeller with the drive pin, install prop washer and prop nut, tighten prop nut 1/4 turn past snug. The installation is simple and fast, does not require complicated operations, but need be careful, over tightening prop nut may damage prop. 【How to Confirm Compatibility】1). Measure the motor housing diameter at the propeller mounting point, If it measures 3-5/8", MKP-32 will NOT fit. If it measures 3-1/4" (3.25"), MKP-32 will NOT fit. 2). Or Check the serial number prefix on the motor’s label (must be "WW" or "J-O").

This MKP-32 trolling motor prop is compatible with Minn Kota Trolling Motor 3-5/8" MKP-32 Weedless Wedge 2 Prop, designed with swept-back and flared blades to wedge weeds away while conserving battery power, helps to move through heavy vegetation even at slow speeds.

OE Part Number: 2091160, 1865017

Package Includes:

• 1pc Trolling Motor Prop
• 1pc Motor Prop Shear Pin
• 1pc Motor Prop Nut
• 1pc Washer

The MKP-32 trolling motor propeller fit for:

• All Terrain 46,47,50,55,65,70,
• Camo 55XL
• Edge 50,55,70
• Endura 46,50,55
• Endura C2 50,55
• Endura Max 50,55
• Endura Pro 46,55
• Engine Mount 55
• Maxxum 55,65,70
• Maxxum Transom 50,55,70
• Pontoon Hand Control 55,70
• Pontoon PowerDrive V2 54,68
• PowerDrive/PowerDrive V2 50,55,65,70
• Riptide 50,55,65,70
• Riptide Edge/Maxxum/PowerDrive 55,70
• Riptide Terrova/Terrova 55
• Traxxis 46,50,55,70
• Vector/Vector 3X 46,55,70

Steps to Install:

• Disconnect the motor from the battery
• Remove prop nut and washer, turn the old prop to horizontal and pull it straight off
• Align new propeller with the drive pin, install prop washer and prop nut
• Tighten prop nut 1/4 turn past snug

Note: Please be careful, over tightening prop nut may damage prop