SAFETY AND VERSATILITY: These safety anchor straps provide reliable fall protection with a weight capacity range of 130-310 lbs. Ideal for various industrial applications on concrete surfaces, like at a construction site FIELD TEST & FIELD APPROVED: This fall protection lanyard anchor strap offers proven performance in real-world conditions, ensuring the anchor safety strap is reliable and effective in demanding work environments DURABLE CONSTRUCTION: Dual reinforced webbing, heavy-duty stitching, and premium outer sheath protect against wear and abrasions, enhancing the strength of the safety harness anchor strap EASY INSTALLATION: Features a small size webbed loop and large steel ring for quick and secure safety belt or safety harness lanyard setup on concrete structures COMPLIANCE & STANDARDS: Meets OSHA 1910 & OSHA 1926 Subpart M requirements, and is compliant with ANSI Z359.18-2017 and ANSI A10.32-12 for fall protection assurance Inspection Procedure: Step 1: Webbing/Stitches- Grasp webbing in your hands approximately 6 in. (152mm) to 8 in. (203mm) apart. Bend webbing in an inverted “U”. The resulting surface tension will allow easier detection of damaged fibers or cuts. Follow this procedure along the entire length of the webbing, inspecting both sides of each strap. Watch for frayed edges, broken fibers, pulled stitches, cuts, burns, and chemical damage. Step 2: D-Rings- Check D-rings for distortion, cracks, breaks, and rough or sharp edges. D-ring should pivot freely. Inspect for any unusual wear, frayed, or cut fibers, or broken stitching of the D-ring attachments. If inspection reveals any defect, inadequate maintenance, or unsafe condition, remove Concrete Anchor Strap from service immediately. OSHA & ANSI CERTIFIED The Malta Dynamics fall protection Concrete Anchor Straps have been tested to meet the strict standards of OSHA 1910 & OSHA 1926 Subpart M and are compliant with ANSI Z359.18-2017 & ANSI A10.32-12. EASY INSTALL When working with temporary and semi-permanent anchor safety straps, they should be easy to install. These anchors can be installed in minutes by looping the strap around an anchor point and threading the smaller D-Ring through the larger D-Ring. LIGHTWEIGHT The Malta Dynamics Concrete Strap Anchors are made with ultra-lightweight materials for easy install and transport. The whole unit weighs less than 1 lb. NO DAMAGE Staying safe should always be your priority. Sometimes it’s hard to anchor safely to a surface without leaving holes that must be filled after removal of the anchor, but these safety strap anchors are reusable and leave no lasting damage. CERTIFICATIONS: OSHA 1910 & OSHA 1926 Subpart M ANSI Z359.18-2017 & ANSI A10.32-12 FEATURES: Worker Weight Capacity Range: 130-310 lbs. (including all tools and clothing) Minimum tensile breaking strength: 5,000 lbs. Webbing Material: Polyester D-Ring Material: Galvanized Steel Product Weight: 0.6 lbs. PREMIUM BENEFITS: Increased Durability with Dual Reinforced Webbing and Heavy Duty Stitching Premium Heavy Duty Outer Sheath Protects the Inner Core Against Abrasions and Wear Malta Dynamics’ Signature Orange Accents Increase Visibility Standard Size D-Ring and Large D-Ring for Easy Pass-thru and Installation